Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 02-17-2013, 04:11 PM #1
ChaosProz
...............
 
ChaosProz's Avatar
 
Join Date: Dec 2012
Location: Virginia
ChaosProz is attending Decay of Nations VII
Dye DM6 - LPR, Hyper, and Dwell settings?

My bolt sticks right in the middle of hopper hole.. messed around with lpr, reg, and dwell.. air leaking...

whats the best recommendation for lpr, hyper, and dwell settings? Thanks!
__________________
Empire Axe - Dust Black.
ChaosProz is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 02-17-2013, 04:35 PM #2
Dye4life5000
 
 
Join Date: Jul 2012
I use 18ms dwell, hyper reg 4 turns out nd lpr 3.5 turns out. But its mostly your preference. Wheres it leaking from?
Dye4life5000 is offline   Reply With Quote
Old 02-17-2013, 04:38 PM #3
ChaosProz
...............
 
ChaosProz's Avatar
 
Join Date: Dec 2012
Location: Virginia
ChaosProz is attending Decay of Nations VII
Quote:
Originally Posted by Dye4life5000 View Post
I use 18ms dwell, hyper reg 4 turns out nd lpr 3.5 turns out. But its mostly your preference. Wheres it leaking from?
right out of the hole of the bolt on the back of the marker. need lube the oring?
__________________
Empire Axe - Dust Black.
ChaosProz is offline   Reply With Quote
Old 02-17-2013, 05:24 PM #4
jojo750
retired again 03-30-2014
 
jojo750's Avatar
 
Join Date: Jul 2003
Location: south carolina
Annual Supporting Member
 has been a member for 10 years
jojo750 donated to help Peyton Trent
jojo750 supports Team VICIOUS
jojo750 supports Team VICIOUS
jojo750 supports Team VICIOUS
that will leak if it doesnt have enough pressure to seal it.
try turning up the hpr a little until it seals.

also, make sure there is a new battery in the marker. fresh lube on bolt.
lpr should be 3 turns out for stock.
dwell 18-22 (i run 21 for no special reason)

if it still leaks after this, replace to 2 tail orings.
__________________
"old" feedback (138+)
jojo750 is offline   Reply With Quote
Old 02-17-2013, 07:53 PM #5
HotxRod
 
 
HotxRod's Avatar
 
Join Date: Jun 2012
Location: San Diego, CA
Annual Supporting Member
HotxRod has achieved Level 2 in PbNation Pursuit
HPR should be set at 150-160. If its leaking out of the back cap replace the 011 orings on the back of the bolt. LPR at 3-3.5 turns. Dwell is 18
HotxRod is offline   Reply With Quote
Old 02-17-2013, 09:06 PM #6
Dye4life5000
 
 
Join Date: Jul 2012
Rebuild your bolt so it has fresh orings.
Dye4life5000 is offline   Reply With Quote
Old 02-17-2013, 09:53 PM #7
ChaosProz
...............
 
ChaosProz's Avatar
 
Join Date: Dec 2012
Location: Virginia
ChaosProz is attending Decay of Nations VII
Quote:
Originally Posted by HotxRod View Post
HPR should be set at 150-160. If its leaking out of the back cap replace the 011 orings on the back of the bolt. LPR at 3-3.5 turns. Dwell is 18
I don't have chrono
__________________
Empire Axe - Dust Black.
ChaosProz is offline   Reply With Quote
Old 02-19-2013, 02:10 AM #8
HotxRod
 
 
HotxRod's Avatar
 
Join Date: Jun 2012
Location: San Diego, CA
Annual Supporting Member
HotxRod has achieved Level 2 in PbNation Pursuit
You dont need a chrono. A reg tester will tell you what the reg is set at. If you dont have access to one, turn the hpr all the way in, then back it out about 4-4.5 turns and that will get you to approximately 150 psi.
HotxRod is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump