[wgp03]

i donno buddy i think there is seriously something wrong with this gun. i can get it to click with the parts all out of the gun but once i put the plate on that holds everything in i cant get a constant click. i can get one out of it and the light goes red with a light green flash?

[Jdmek]

helpful thread in the future .. Just bought myself a mini .. New to these pb stuff been out for awhile

[Northernballer]

i had a similar problem id try contacting customer service and send it in thats wut i did and they fixed it something to do with the magnet i beleive it took em two weeks to get it back to me

[SpeedBallDEVIL]

Originally Posted by wgp03

i donno buddy i think there is seriously something wrong with this gun. i can get it to click with the parts all out of the gun but once i put the plate on that holds everything in i cant get a constant click. i can get one out of it and the light goes red with a light green flash?

Sounds like a board issue if it does click but remains unresponsive. You may want to try a new brand name 9 volt battery. Also make sure all you connections are good, ie no breaks in battery or solenoid harness, no bend prongs from upper to lower boards, etc. if you can also try swapping both boards with a friend to see if you can pinpoint the issue that way.

You can also make sure you have the upper magnet that is located on the bottom of the body in the center. And obviously make sure there is one on the HES magnet set screw in the trigger.

[RotorHead123]

Great Info in here! I have been having a lot of problems with the Mini I just purchased. Great to see there is so much support on this marker. If anyone lives close to Huntington Beach please contact me as I could use someone to help me with tuning and the issues I am having with it.

[jgossett]

Originally Posted by SpeedBallDEVIL

If I recall correctly, some of these techt bolts did not fit? Someone help be out here.

My techt bolt didnt fit either, but I found that if I turned around the spring to the side that doesnt click, it fit. Havent had any problems with it since.

[jgossett]

Originally Posted by wgp03

i donno buddy i think there is seriously something wrong with this gun. i can get it to click with the parts all out of the gun but once i put the plate on that holds everything in i cant get a constant click. i can get one out of it and the light goes red with a light green flash?

You might have a pinched or pulled wire since it works fine when it is freely laying out but not when its crammed together. Every problem that I thought I had with my mini ended up being an old battery, luckily.

[Bad Medicene]

So my mini leaks horribly through the bottom of the noid. What do I do?

EDIT:

got a new solenoid and a got a upgraded trigger. I installed the new trigger made sure the magnet was in the right place and installed the new solenoid and a brand new battery, now it doesn't click with eyes off. Anything I might have done wrong?

[boneheadplay]

Nice thread, thank you for the great information!

[vince917]

I worked on a friend mini of mine that has major blow back. Another possible reason for blowback especially if you take your gun apart to clean it is that the tiny check valve that goes above the grip grand has fallen out. It took me awhile to realize this (mainly because I wasn't the I've to take the gun apart when the check valve was misplaced) but also because no one has ever covered this as a problem. The best way to describe g6r check valve is that it looks like a grain of rice both size and color

[Angelo_Here]

Fixed the leaking problem that was coming down from the barrel. Thanks, and great guide!

[miamiboy_187]

Where is the tournament lock button? I am having issue with the Mini not turning ON.

[iTryhHardy]

Can Somebody please help me ! , I lost the glass for the gauge on my mini , and there seems to be a small leak . Is it because of the gas or some type of leak in the gauge please help me been trying forever !

[TheBoss33]

Originally Posted by iTryhHardy

Can Somebody please help me ! , I lost the glass for the gauge on my mini , and there seems to be a small leak . Is it because of the gas or some type of leak in the gauge please help me been trying forever !

You need a new gauge.

[iTryhHardy]

Originally Posted by TheBoss33

You need a new gauge.

ok cool do you know how to take it off or how to repklace it ? cant seem to find out :/

[Danny Wing]

i stripped a bolt on the asa mount and cant get it off and its leaking bad because its not tight enough... dont know what tooo doo helppp!!!!

[private_silver]

Sounds like you'll need a counter bit and drill out the old screw and put a new one in if it's stripped that bad.

[Danny Wing]

Originally Posted by private_silver

Sounds like you'll need a counter bit and drill out the old screw and put a new one in if it's stripped that bad.

it worked thanks soo much

[TheRealSpyro]

Great Post! helped me more than once thank you very much

[Vrodryda]

Nvm lol

[*outbreak]

Originally Posted by Danny Wing

i stripped a bolt on the asa mount and cant get it off and its leaking bad because its not tight enough... dont know what tooo doo helppp!!!!

I have a similar problem, accept for mine is on the battery door.

Im gonna drill that sob, i just cant remeber if the female portion on the forgrip is bevelled at all, or how close the battery plug in is in reference to the entry point from the drill. lol just wana make sure before i go to town and **** some stuff up.

also is some one has a thumb screw to sell thatd be coo

thanks fellas

awesome sticky btw. great info