 |
02-03-2013, 07:46 PM
|
#1
|
|
|
Creed leaks from the noid
I tried cleaning and servicing my solenoid and it's still leaking. It's still fire but it's leaking. Any ideas guys thanks?
[IMG]  [/IMG]
__________________
Current Gun:
Vanguard DemOn, DangerOus pOwer G4 & thReShOld, Phantom Pump
Past Gun: Tippmann(98,Project Salvo, A5, Phenom) Dangerous Power(FX, G5, Rev-i, G3 iQ) Spyder Fenix, Smart Parts SP1 & Shocker NXT Octane, Vanguard Creed,GOG Excty
|
|
|
|
02-04-2013, 01:32 PM
|
#2
|
|
Vanguard East Coast
Join Date: Feb 2005
Location: Stoughton MA
|
Strange I know, but sometimes when a MAC noid on the creed goes it will still shoot and cycle fine while leaking air. If you're sure that it is in fact the solenoid you will need a new one.
Quote:
Originally Posted by JUGGERNAUT69
I tried cleaning and servicing my solenoid and it's still leaking. It's still fire but it's leaking. Any ideas guys thanks?
[IMG] [/IMG] |
|
|
|
|
|
02-04-2013, 04:09 PM
|
#3
|
|
|
Nevermind I got it fixed, I took the part of the solenoid where it was leaking and washed it with hotwater and it's not leaking anymore just saved myself $100 lol 
[IMG]  [/IMG]
__________________
Current Gun:
Vanguard DemOn, DangerOus pOwer G4 & thReShOld, Phantom Pump
Past Gun: Tippmann(98,Project Salvo, A5, Phenom) Dangerous Power(FX, G5, Rev-i, G3 iQ) Spyder Fenix, Smart Parts SP1 & Shocker NXT Octane, Vanguard Creed,GOG Excty
|
|
|
|
|
02-04-2013, 10:28 PM
|
#4
|
|
Vanguard East Coast
Join Date: Feb 2005
Location: Stoughton MA
|
Sometimes some oil int there will lube those tiny internal orings.m
|
|
|
|
|
02-05-2013, 12:22 AM
|
#5
|
|
Join Date: Aug 2001
Location: SSM, Ontario, Canada
|
Are you using grease on your ram? If so it may be clogging the noid.
__________________
Creed Battery f/s
Creed Replacement eyes f/s
Creed replacement solenoid f/s
06 alien remains board f/s
|
|
|
|
|
02-05-2013, 07:14 AM
|
#6
|
|
|
No, it was just some dirt got in the noid. Rinsed with hotwater and leaks gone
__________________
Current Gun:
Vanguard DemOn, DangerOus pOwer G4 & thReShOld, Phantom Pump
Past Gun: Tippmann(98,Project Salvo, A5, Phenom) Dangerous Power(FX, G5, Rev-i, G3 iQ) Spyder Fenix, Smart Parts SP1 & Shocker NXT Octane, Vanguard Creed,GOG Excty
|
|
|
|
|
02-05-2013, 09:23 AM
|
#7
|
|
NEW ENGLAND AVALANCHE
Join Date: Oct 2007
Location: Florida
|
Can I send you about 300 solenoids to clean for me?
__________________
New England Avalanche 2012 Sponsors
|
|
|
|
|
02-05-2013, 09:47 AM
|
#8
|
|
|
Sure Frank, but its gonna cost you 1 brandnew 2013 Demon lol 
__________________
Current Gun:
Vanguard DemOn, DangerOus pOwer G4 & thReShOld, Phantom Pump
Past Gun: Tippmann(98,Project Salvo, A5, Phenom) Dangerous Power(FX, G5, Rev-i, G3 iQ) Spyder Fenix, Smart Parts SP1 & Shocker NXT Octane, Vanguard Creed,GOG Excty
|
|
|
|
|
02-05-2013, 10:36 PM
|
#9
|
|
Join Date: Aug 2001
Location: SSM, Ontario, Canada
|
lol
__________________
Creed Battery f/s
Creed Replacement eyes f/s
Creed replacement solenoid f/s
06 alien remains board f/s
|
|
|
|
|
02-10-2013, 05:10 PM
|
#10
|
|
|
The skit workt whit hotwater!!!!
Thx for the tip juggernaut69! |
|
|
|
|
02-12-2013, 06:04 AM
|
#11
|
|
|
Quote:
Originally Posted by Hillde
The skit workt whit hotwater!!!!
Thx for the tip juggernaut69! |
Im glad it worked out for you man 
__________________
Current Gun:
Vanguard DemOn, DangerOus pOwer G4 & thReShOld, Phantom Pump
Past Gun: Tippmann(98,Project Salvo, A5, Phenom) Dangerous Power(FX, G5, Rev-i, G3 iQ) Spyder Fenix, Smart Parts SP1 & Shocker NXT Octane, Vanguard Creed,GOG Excty
|
|
|
|
|
02-13-2013, 07:58 PM
|
#12
|
|
I am Philosoraptor
Join Date: Apr 2011
Location: Arden NC
|
now how do I get cut wires fixed with hot water.....
|
|
|
|
|
02-15-2013, 03:38 PM
|
#13
|
|
Join Date: Aug 2001
Location: SSM, Ontario, Canada
|
fix
Quote:
Originally Posted by Pdubs
now how do I get cut wires fixed with hot water.....
|
Simple.
Step one:
Heat up water.
Step two:
Find the cut wires and remove some of the insulated coating on both sides of the cut.
Step three:
Now twist the uncoated parts of the wires together to join them. Wrap the join with electrical tape.
Step four: Use the hot water to make tea and enjoy your handywork. 
__________________
Creed Battery f/s
Creed Replacement eyes f/s
Creed replacement solenoid f/s
06 alien remains board f/s
|
|
|
|
|
02-15-2013, 08:17 PM
|
#14
|
|
|
Quote:
Originally Posted by MstrKey
Simple.
Step one:
Heat up water.
Step two:
Find the cut wires and remove some of the insulated coating on both sides of the cut.
Step three:
Now twist the uncoated parts of the wires together to join them. Wrap the join with electrical tape.
Step four: Use the hot water to make tea and enjoy your handywork. |
lol
__________________
Current Gun:
Vanguard DemOn, DangerOus pOwer G4 & thReShOld, Phantom Pump
Past Gun: Tippmann(98,Project Salvo, A5, Phenom) Dangerous Power(FX, G5, Rev-i, G3 iQ) Spyder Fenix, Smart Parts SP1 & Shocker NXT Octane, Vanguard Creed,GOG Excty
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
