[harbinger626]

Originally Posted by Sirriko

UPDATE:

I did a full maintenance on the regulator and the gun itself. I check all fittings and all o-rings. And nothing much has changed :/.... And I also just found out then when i bottom out the air, the pressure gauge stays at 150 even with no air in the reg (yes i bottomed it out properly). Any ideas?

sounds like your guage is busted if it isnt hitting zero with a closed off reg

[Sirriko]

hmmm so maybe my gun is fine? lol

[harbinger626]

Originally Posted by Sirriko

hmmm so maybe my gun is fine? lol

honestly it would make sense that your guage is shot so what it says is 200 psi might only be like 120 psi i would see if the shop has a guage that works and see if they will plug it into your frame and see if it helps

[Lt. Tank]

Originally Posted by Sirriko

UPDATE:

I did a full maintenance on the regulator and the gun itself. I checked all fittings and all o-rings. And nothing much has changed :/.... And I also just found out then when i bottom out the air, the pressure gauge stays at 150 even with no air in the reg (yes i bottomed it out properly).
Could it just be my Ion is not compatible with the hyper 3 reg? maybe the pressure is too low or something
Any ideas? Maybe should I try the stock Reg?

ok, lets rule out the gauge then , try getting or borrowing one asap
Don´t do anything else, first rule the guage out

[Lt. Tank]

Originally Posted by harbinger626

hey tank did you ever mess with the ndz can and ndz donught they boast to add air volume wonder if they are worth looking at

cost / benefit i don´t think its worth it, stay with the stock.....that´s what I think anyway.
The techt sleeper is made in a way that creates more air volume but the cost is weight, don´t believe the NDZ cam / doug provide that same volume

[Sirriko]

I can get another one easily. My Uncle is a huge paintballer and has a basement as basically a paintball shop.. he's just away on vacation so I'll just "borrow" one lol.

[harbinger626]

Originally Posted by Sirriko

I can get another one easily. My Uncle is a huge paintballer and has a basement as basically a paintball shop.. he's just away on vacation so I'll just "borrow" one lol.

let us know how the guage reads

[Sirriko]

Originally Posted by harbinger626

let us know how the guage reads

Will do, hopefully this is the problem...
I'll see tomorrow afternoon since I have work soon. Thnx for all the help guys!

[harbinger626]

Originally Posted by Sirriko

Will do, hopefully this is the problem...
I'll see tomorrow afternoon since I have work soon. Thnx for all the help guys!

from your last few posts its sounding like it i mean if its at 150 psi when the reg is closed that shows you its broken when its showing 200 at this logic its more than likely only at like 50 psi

[Sirriko]

Originally Posted by harbinger626

from your last few posts its sounding like it i mean if its at 150 psi when the reg is closed that shows you its broken when its showing 200 at this logic its more than likely only at like 50 psi

Yea exactly. Lets hope so! Then I can stop bothering you guys, lol.

[harbinger626]

Originally Posted by Sirriko

Yea exactly. Lets hope so! Then I can stop bothering you guys, lol.

i don't mind it gives me both something to do and i learn about different little issues so if i ever get them i know exactly what to do

[the korean1]

Originally Posted by harbinger626

My guess is the reg needs to be serviced it sounds like air is struggling to reach the marker at normal operation levels so either his reg is bad or the air tank is not nearly giving out enough pressure

This is the first thing i would look at. reg and what i later read is the psi guage.
i dont see how changing the frame would affect parts from a direct swap over from a previous working system.
i use a NDZ skeleton bolt (2-3 grams heavier than L7) with APE board psi is 140ish. all else stock.
being an electrician. troubleshooting should always start at the source and progress from there forward. air pressure, then hoses, regulator, etc...

[Sirriko]

Originally Posted by the korean1

This is the first thing i would look at. reg and what i later read is the psi guage.
i dont see how changing the frame would affect parts from a direct swap over from a previous working system.
i use a NDZ skeleton bolt (2-3 grams heavier than L7) with APE board psi is 140ish. all else stock.
being an electrician. troubleshooting should always start at the source and progress from there forward. air pressure, then hoses, regulator, etc...

Yea even the smallest details can slip by, like the gauge itself -__-, I'm picking up a new one this afternoon so lets hope all goes well.

[Lt. Tank]

Originally Posted by Sirriko

Then I can stop bothering you guys, lol.

no problem man, that´s the reason behind the nation, we are all here to help.

[harbinger626]

Originally Posted by the korean1

This is the first thing i would look at. reg and what i later read is the psi guage.
i dont see how changing the frame would affect parts from a direct swap over from a previous working system.
i use a NDZ skeleton bolt (2-3 grams heavier than L7) with APE board psi is 140ish. all else stock.
being an electrician. troubleshooting should always start at the source and progress from there forward. air pressure, then hoses, regulator, etc...

he never stated he swapped the gauge over only put on the frame if the sith came with a gauge its possible it was a bum

[Sirriko]

Yes my guns operating fine now around 150-180, i still need to fine tune it etc. Thanks guys for all the help...

Just wondering if I get the "Virtue Matrix Switch - Black - Dye DM4/5/C & Smart Parts Ion Boards" for the OLED board i have will i need an adaptor or no?

[harbinger626]

Originally Posted by Sirriko

Yes my guns operating fine now around 150-180, i still need to fine tune it etc. Thanks guys for all the help...

Just wondering if I get the "Virtue Matrix Switch - Black - Dye DM4/5/C & Smart Parts Ion Boards" for the OLED board i have will i need an adaptor or no?

so that guage was just putting out the wrong reading then?

[Sirriko]

Originally Posted by harbinger626

so that guage was just putting out the wrong reading then?

Yup, do u happen to know about the virtue membrane pad?

[harbinger626]

Originally Posted by Sirriko

Yup, do u happen to know about the virtue membrane pad?

i know of them and their use i never did the membrane mod though im debating doing it for my epihany frame though