Marq board question.

Matrix_balla69 · 02-12-2013, 02:54 PM

I've got my buddies marq and the board looks like a frenzy 4.0 board. The gun isn't cycling correctly and when I went to double check the dwell setting(Aqua on frenzy 4.0) it shows one flashing LED. I go to adjust it to 8 and when I get to about 6 clicks it exits programming mode and turns off without saving. Yet when I select green and aqua it flashes 8 clicks and WILL save when I program.

What I'm confused about is whether or not green and aqua is dwell and if so that means this is a different board/software. Any info will help and sorry about that cluster of confusion.

gamer565 · 02-12-2013, 07:58 PM

Knowing exactly what board you have would be a good start. Post a picture of the board.

Matrix_balla69 · 02-13-2013, 07:36 PM

It looks exactly like the frenzy 4.0. No dip switches blue tourney lock button on the bottom.

gamer565 · 02-14-2013, 12:56 AM

Then read the frenzy4 manual/thread..

Some of the colors may look the same, so from the top of the program count to the mode your wanting to change.
Firing mode is one, dbounce is two and so one.