[sib9397]

Hey nation,
I have some simple questions about the kaos pump. Other than those, I have no problems with this great marker. Thanks for reading.

1. Feed neck. Let's face it. It's crap. It's a pain to tighten, and it never gets quite tight enough. What I am wondering is what thread is it for replacements? And do you have any suggestions on which to get?

2. The barrel. This thing is basically a blender when you play in cold weather. Chops all over the place. I want a new barrel for it, but the stock barrel has that clever anti roll-out o-ring. Would the tect-t iFit 6 peice barrel kit on my Etha stock barrel be better? I"ve heard boring fixes the roll-outs, but I don't want to pay for a freak kit and such. By the way, the Etha stock barrel is .693.

3.THAT GOSH DARN STUPID FART! My friend had the tech-t hush bolt. He gave it to me for $20. It makes the gun quieter and more efficient and consistent, but it doesn't do crap for the fart. I was wondering if there are any easy and cheap fixes for that.

Thank you for your help!

[Vidalecent]

Feedneck is Ion threaded, to fix the farting you need to sweet spot the valve spring and main spring. You can make the feedneck grip your loader better with some duct tape on your loaders neck.

[firl21]

the fart noise. lol.
anyway
1. calmping feedneck
2.deadlywind fibur done
3. hush bolt + sweetspot.
DONE

[sib9397]

Thanks. I will try all of the above suggestions!

[Henchman]

How do yo "sweetspot"?

[firl21]

take the reg and turn it down way low. You'll be chronoing quite low, for now. Go to your nearest chrono range and check your velocity. Start turning up your reg, a little at a time. Take a few chrono shots after each adjustment, your velocity should be going up, quite possibly above 300fps. Keep increasing until your velocity stops increasing and starts to go down, then turn the reg back down to the point where the velocity was the highest. Adjust the main spring to bring the velocity back down to a safe speed.

[sib9397]

Thanks Henchman and firl21. I was going to ask the same question. I thought you only had to sweetspot autocockers and sniper pumps. Thanks for the great answer.