GoG Extcy won't shoot, help!!

Sully_6pb · 01-29-2013, 09:05 PM

Okay so I just received my extcy and it's definitely not my first marker, I chose this one because of the price and also because my team plays both speedball tournaments and woodsball, well I go to my local field and I just put a brand new Duracell battery, changed my dwell settings for HPA and everything was all ready to go, until I pulled the trigger and nothing happened, I've tried just about everything I know how to do and still not shooting, any help would be great!

Vidalecent · 01-29-2013, 10:53 PM

Is your reg turn all the way down? There may be no pressure running to the gun at all.

Sully_6pb · 01-29-2013, 11:08 PM

My ASA is turned on completely and when I do turn my ASA on I can see air shooting out of the hole at the top of the regulator, also when I take my HPA tank out of my ASA I can hear the bolt get pushed hard with air, so I'm assuming it is getting air to the internals

Sully_6pb · 01-29-2013, 11:15 PM

Also this was my first time taking this gun out, so it has never been shot

Vidalecent · 01-30-2013, 01:11 AM

Can you leave a photo with you pointing to where the air is leaking from. It will help me get a better idea of what's going on.

Sully_6pb · 01-30-2013, 06:51 AM

I will post a video tonight when I get home from school, thanks for the replies

Vidalecent · 01-30-2013, 07:16 PM

No problem

shocktroop · 01-30-2013, 11:49 PM

Can you hear the solenoid "beep?"
U can make sure it's actually airing up by making the bolt stay in the forward position before you air it up. Once you do turn on the on ASA, the bolt should reset back.

Sully_6pb · 01-31-2013, 12:00 AM

I'm not sure what you mean by "beep" but my bolt does move forward when I turn my ASA on, that's how I know air is getting through the gun

GOG Paintball · 01-31-2013, 10:59 AM

Here's a suggestion give us a ring and see if we can help you out over the phone. 724-209-1059 and if the techs dont pick up please leave a message. Or pm me your contact info and Ill have one call you. Thanks

fishballer06 · 01-31-2013, 11:31 AM

Check to make sure there is no damage to your battery harness. Or damage to the power button on the board. If all that check's out ok, I'd give GoG a call. They're extremely helpful

ReynardHonda · 02-10-2013, 06:58 PM

There is a relief valve that allows air to escape out of the top of the regulator and according to the manual doesn't necessarily indicate a problem unless it's a constant leak.

I had the same issue with air leaking out the hole in the regulator. My regulator was turned to max when I got it and I never thought to check what it was set to. First time out I blew the o-ring(s) in the relief valve. I rebuilt the entire regulator including the relief valve and the problem went away. Turns out the small o-ring at the top of the relief valve was damaged.

Dunno if that's your entire problem but may be the problem with the air leak.

Sully_6pb · 02-11-2013, 07:47 AM

I have sent my gun into GoG and it should return this week

insanity16 · 04-03-2013, 12:25 PM

Quote:

Originally Posted by Sully_6pb

I have sent my gun into GoG and it should return this week

Did you get your eXTCy back? What was the issue?
If I were you, I would check the 2 internal micro lines, make sure they are still attached and the line is not damaged and is firmly secured to the reg and QEV.

Hope you get it sorted out!

Reactor · 04-03-2013, 08:37 PM

I have found that duracell batteries although last a long time in many electronics do not provide enough poteitial to run the marker. My marker is very picky about batts and I can only get the marker to fire with energizer max or something similar. Had the same issue the first time I ran mine, nice batt and the issue was resolved.