 |
02-04-2013, 05:41 PM
|
#1
|
|
You Are A _______!
Join Date: Feb 2011
Location: tx
|
What pressure should i run on my demon
I'm using a 68/45 ninja tank with ninja reg with both red shims in so its set to the high pressure, should i take a shim out or both
__________________
CTS of DALLAS
TEXAS EQUINOX
|
|
|
|
02-04-2013, 10:07 PM
|
#2
|
|
Youtube = BTDeltafan101
Join Date: Sep 2010
Location: Ontario, Canada
|
Recommended pressure for the demon is about 550 psi so just take a few out to make it more of a mid pressure setup.
|
|
|
|
|
02-04-2013, 10:11 PM
|
#3
|
|
|
what do you mean by both red shims?
|
|
|
|
|
02-04-2013, 11:11 PM
|
#4
|
|
Mowing Fools Since 1987
Join Date: Nov 2004
Location: On a cozy street corner
|
This should help, straight from Ninja's Website
 |
|
|
|
02-05-2013, 07:20 PM
|
#5
|
|
|
I know what he means. My older ninja tank only has the two red shims not what u posted. Go to this site. http://www.ninjapaintball.com/docume...s%20Manual.pdf
I took out the 2 red shims that would bring it to 500 psi. and added a silver one to bring it up a little
Last edited by z_meister : 02-05-2013 at 07:32 PM.
|
|
|
|
|
02-05-2013, 08:25 PM
|
#6
|
|
You Are A _______!
Join Date: Feb 2011
Location: tx
|
i don't have any silver shims, can i just take out 2 shims and do it like that and the demon work fine
__________________
CTS of DALLAS
TEXAS EQUINOX
|
|
|
|
|
02-05-2013, 08:32 PM
|
#7
|
|
|
Quote:
Originally Posted by anthrax4dinner
i don't have any silver shims, can i just take out 2 shims and do it like that and the demon work fine
|
prolly. do u have a reg tester. 500 should work fine. if u remove one the psi should be about 650. that might be better but im not a Vanguard tech. in fact i dont even have mine yet. (will on friday) LOL I was actually going through this same situation. if u live by any shops u can probably get a rebuild kit for under 10 bucks. that will have the silver ones. if u wanna mess with it. but 500 like i said should work. i dont think u will notice a difference in 50 psi. plus i heard people running on lower. just 550 is what is recomended |
|
|
|
|
02-08-2013, 05:47 AM
|
#8
|
|
Fox Battalion II
|
You heard right. Im using an old ambush fuku reg that cimpletely broken in with the pressure at 350psi and my demon runs fine at 270-285 fps. Im actually getting a good consistency over the chrono too.
|
|
|
|
|
02-09-2013, 11:01 AM
|
#9
|
|
|
what benefits do i get running on 550psi instead of 850psi?
|
|
|
|
|
02-09-2013, 11:20 AM
|
#10
|
|
Join Date: Oct 2004
Location: AZ, USA
|
Slightly easier on the internal routing seals and reg seals so it might prolong having to do rebuilds. Depending on the quality of the reg (never actually used 850 on a Demon so no experience), you'll get better shot to shot consistency as far as velocity.
|
|
|
|
|
02-10-2013, 06:38 AM
|
#11
|
|
YOUNGSTOWN CREW
|
Quote:
Originally Posted by juggernaught_lives
This should help, straight from Ninja's Website
|
Nice post.
I run mine with no shims... its output is about 455-450.. |
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
