ok so when i flip the asa on empire axe it leaks from every were then i flip asa off then back on and it pressurized with no leaks but then i when im done and unhook tank and leave gun for ten hours does the same leak thing again!!!!!im not happy already sent to empire they sent it back with out fixing it
One, use punctuation and grammar. It makes it a hell of a lot easier to read and understand you.
Two, WHERE is it leaking from. "Everywhere" is close to impossible, as that would basically mean every single oring in you marker is wearing out at the same time (Not completely impossible, but extremely improbable).
PINPOINT where exactly the leak is coming from. Chances are it's either your poppit not sealing up properly the first time, a dry/wearing out transfer tube o-ring, the solenoid o-ring, or the bleed valve isn't quite resetting properly. Once we know WHERE the leak is (air it up and feel around quick, find where the air is coming from), we can better help you fix it.
As to why it does it again after sitting for so long, lube will dry slightly, orings shrink a little, everything just settles back down.
Dust Black Axe w/ white accent
14" Freak Kit
Spire with CrownSF
Crossfire 68/45 w/ Stealth
i just lubed cleaned and lubed every dam oring on gun changed entire poppet. Im going to wait two and a half days then check again if i still have problems im calling empire...good thing i bought two axes..... by the way just call kee action sports there customer reps are dope
had the same problem which started in the cold the pressure release valve on the air tube in the grip doesn't seal. I called Kee and they sent me a mini tube without the hole. Haven't had an issue since then.
Charm City Chokehold
Main Marker: Ego LV1-Dye Rotor-Ninja SL 68/4500 with Ninja V2 SLP Pro reg
Back up: 2k12 Flame G6R-Virtue Spire-Ninja 45/4500 with Ninja SLP Pro reg