[ReynardHonda]

Seems I mixed up the order in which the banjo fittings are supposed to go back in. The front one is obvious enough the problem is the second and third (from front to back) are very similar with one being just slightly longer and the other having a ridge just below the air hole on the vertical portion of the fitting. Seems to me the fittings should be front to back from shortest to longest but I seem to get a leak in the back fitting area with that configuration.

Any help would be great. all banjos have new orings on both the bolt and the the seating portion.

Thanks.

[ReynardHonda]

Upon further trouble shooting it would appear that the leaking may actually be coming from between the two halves of the solenoid. I replaced the o-ring in there but just can't seem to get rid of the leak. I'm at a bit of a loss if anyone has any ideas.