[TyeStick]

I've been in the process of modding my LED, and the first 'major' mod was the Scenario Dreams, Universial T-Board. It's nice to have all the current firing modes, as well as having converted the Angel to 9volt.

Speaking of 9volts, not all 9volts are made equal. Cheaper knock-off 9volts can be a bit bigger than your Duracell or Energizer 9volt. The space inside the LED is limited. Very limited. So limited, that the size of your 9volt will matter. Although, you could of course shave some metal from inside the grip frame if needed to be, but I'm pretty limited on the tools that I have on hand.

Here's a picture of what she looks like so far... Pictures added of inside grip frame. Doesn't show much..

Let me know what you guys think.

[dr.strangelove]

Looking good. Unfortunately the MT's never did the eye mod on the LEDs, and on a classic gun I lean more towards leaving them un-touched these days myself. With the Universal T board in it, you've always got the option available though, which is nice.

[TyeStick]

What was the reason behind MT's not doing the eye mod on the LED's?
Also, will running a Rotor on the LED, be a problem with rollback?

[dr.strangelove]

Because of the "crack pipe" and location of the air transfer I don't think they were able to cut a recess in the bottom of the body to accommodate the rubber eye straps.

Running the Rotor should be okay as long as you've got a good detent installed and proper ram alignment.

[imOGpb]

very classy my friend. . i plan on doing the t board on an alien led next week if all works out

[TyeStick]

Originally Posted by imOGpb

very classy my friend. . i plan on doing the t board on an alien led next week if all works out

If you can install the board yourself, you'll end up saving yourself a few bucks. If you plan on having someone install the T-Board, you might want to consider holding on to your LED for some time, due to the money you're investing into your project.

[Grizle]

awesome, just did this to one of my led's nice job!

[imOGpb]

ill be doing it my self for sure. but i plan on keeping it forever honestly. itll be a wall hanger if i loose my legs and cant play any more. could you post up some pics inside the grip frame maybe ??

[imOGpb]

is that an old cocker reg like off an sto or somthing?

[TyeStick]

Originally Posted by imOGpb

is that an old cocker reg like off an sto or somthing?

It's a WGP Ergo Regulator. Yes though, you'll often see them on Autocockers.

Grip pictures added to first post.

[imOGpb]

thanks for putting up the pics clean work

[Japy]

looks real good with a rotor on it.

[HolySokz]

I remember modding a old LED i had but it was with a morlock board and I used the side that would hold the battery as a air chamber. But it did do 23 bps with no shot down.

[Alax]

angel is out of business but i s in this forum

[trancer23]

what?

[theflash]

Definitely a fan of the OG Angel restorations going on. I get the "Whoa, that's ancient" comments and looks from the kiddies working the local fields all the time with my Angel Speed. That must really throw people for a loop! I particularly like the single trigger, always liked those.

[r90t]

I have an led with a predator board and eyes. This thing can still hang with newer guns using the enhanced firing modes with a single trigger. Refs usually do a double take when they hear it rip. no shootdown, either.