[Vegard]

Are there any Impulse boards that allow for modern firemodes and bps caps?

I used to shoot Imps back in the day and was looking into either reclaiming my Adrenalin or finding a worthy substitute if that fails.

[ripdisc]

WAS and blackheart are generally the ones people go for...i'm not positive they will do all the current settings but they should get you close. i believe lights out on impulse-owners still flashes WAS boards.

the universal T board is an option although i dont know if they keep their software up to date or are even still around...
ECS flashing of the cricket boards allowed most of the caps and modes to work but those are getting hard to find. you might be able to make a cable and flash the right version cricket board yourself.
i have an old km2 genesis board that lets the firing rate cap at 10bps so it would get you close.

the old imp stuff is getting pretty dated and its also getting hard to find. hopefully someone else can chime in with some definitive answers.
you could try to search around for manuals/info on the boards i mentioned above. that's about all the imp boards that were made.
I have seen a shocker board put into an impulse...

[Vegard]

Thank you for the reply, I'm going to have a look at the boards you mentioned

[msonic]

The WAS board with the latest flash is one of the best imo. NXL, PSP, Semi. Adjustable bps included.

More of them available too.

[Vegard]

Thanks msonic!
Perhaps my idea of using one in a local tournie was a tad rash as they only use millennium. Oh well.

[Japy]

They'd prolly never notice you're using PSP vs millennium .. the only difference is ramp restart time.

[Vegard]

They check actually

[ripdisc]

http://www.impulse-owners.com/page/?id=5
there are the manuals.
that's a pretty good place to check for boards and the imp trading thread in this forum.

[Vegard]

Thanks, looking into it now

[89raider]

yea Scenario dreams is still around, talked to damon the other day about installing one in my buddies timmy... if you're nervous about doing the install they could probably do it for you.... the WAS and blackheart have all the modes you'd want, and i believe theres somebody on impulse owners who also flashes ECS boards