 |
|
02-06-2013, 11:54 AM
|
#106
|
|
Keyboard Warrior
Join Date: Dec 2004
Location: Tampa, FL
|
Quote:
Originally Posted by poloboy821
What was wrong and how much did it cost you?
|
The LPR leaked, so it climbed with the HPR. I got the LPR fixed for about an hour and the gun wouldn't cycle, I thought the noid was blown.
The problem was I only have shocker Orings, so the Orings around the outside, the actual width of the Oring wasn't big enough. (I think that is what he said.)
Also, the bottom part of the noid was flipped around the wrong way. Whenever I took it apart I made sure to keep the parts flipped the way they were, so I wouldn't have ever tried to flip it around unless I did it on accident.
All total, it cost me $60 to fix it(which is a LOT less than BLAST), plus whatever shipping he is going to use. At least that is his rough estimate. I will get the final bill whenever he finally gets around to sending me an invoice.
Last edited by Paper_Cut : 02-06-2013 at 11:56 AM.
|
|
|
|
02-06-2013, 01:45 PM
|
#107
|
|
Timmy Clan Prez
Join Date: Dec 2004
Location: Parrish ,Fl
|
Shame, i would have fixed it for free. I fixed peoples guns for free for like a year over on IOG.
__________________
Timmy Clan ~~Robert Kerr May You Rest In Peace 1991-2010.~~
|
|
|
|
|
02-06-2013, 06:12 PM
|
#108
|
|
Tengoungato?
Join Date: Aug 2004
Location: San Diego, South Cali
|
Got mah tax return. Money well spent on the Jeep.
|
|
|
|
|
02-06-2013, 06:50 PM
|
#109
|
|
LOST
Join Date: Aug 2001
Location: Norđwegr
|
The anno on that is amazing! |
|
|
|
|
02-06-2013, 07:10 PM
|
#110
|
|
ShockerRepair.com
Join Date: Mar 2005
Location: PA
|
Too flashy for my likes
|
|
|
|
|
02-06-2013, 07:28 PM
|
#111
|
|
LOST
Join Date: Aug 2001
Location: Norđwegr
|
The milling is still ugly as sin, so is the barrel back breaking everything up, but the rest..  |
|
|
|
|
02-06-2013, 08:58 PM
|
#112
|
|
Timmy Clan ExPresident
Join Date: Apr 2007
Location: new hampshire
|
Quote:
Originally Posted by Vegard
The anno on that is amazing!
|
id prefer the front splash pattern on the whole gun
__________________
Timmy Clan
R.I.P Rob Kerr (Bloodangel13) DunkinDonuts Creating backplayers on a daily basis Originally Posted by 1stGenRex
"IDK that I have something that would accurately measure something that small...maybe I could send it to TJ and he could use the same device he measures his penis with."
|
|
|
|
|
02-06-2013, 09:14 PM
|
#113
|
|
LOST
Join Date: Aug 2001
Location: Norđwegr
|
I like the mix of it myself.
|
|
|
|
|
02-06-2013, 11:48 PM
|
#114
|
|
Go big or go home
Join Date: Mar 2006
Location: Destin, Fl
|
All this talk of bikes makes me want one again :/
I have about 2k coming back on my tax return... it may not last long...
|
|
|
|
02-07-2013, 07:29 AM
|
#115
|
|
Keyboard Warrior
Join Date: Dec 2004
Location: Tampa, FL
|
Quote:
Originally Posted by poloboy821
Shame, i would have fixed it for free. I fixed peoples guns for free for like a year over on IOG.
|
Well, in about a year its going to need a complete tear down.
Quote:
Originally Posted by Vegard
The milling is still ugly as sin, so is the barrel back breaking everything up, but the rest.. |
I thought I was the only one who didn't like the dragon milling. |
|
|
|
|
02-07-2013, 11:01 AM
|
#116
|
|
Tengoungato?
Join Date: Aug 2004
Location: San Diego, South Cali
|
IMO, its not the worst milling, nor is it the greatest. The Anno takes away from the milling though and completely hides it. Solid colors are best on markers with intricate milling like that, imo.
|
|
|
|
|
02-07-2013, 11:35 AM
|
#117
|
|
ShockerRepair.com
Join Date: Mar 2005
Location: PA
|
I like the fade on mine
 |
|
|
|
|
02-07-2013, 12:30 PM
|
#118
|
|
Keyboard Warrior
Join Date: Dec 2004
Location: Tampa, FL
|
Dragon milling gives the gun a fat ***. I prefer sleek, like the F5 milling.
EDIT: I can't wait until Wreck-It Ralph comes out on BluRay. I've been waiting forever to see that movie.
Last edited by Paper_Cut : 02-07-2013 at 12:49 PM.
|
|
|
|
|
02-07-2013, 03:40 PM
|
#119
|
|
LOST
Join Date: Aug 2001
Location: Norđwegr
|
wrecki-it looks promising indeed, really want to see it
|
|
|
|
|
02-08-2013, 10:38 AM
|
#120
|
|
Looking at ( . Y . ) 's
Join Date: Oct 2005
Location: Boobieland
|
hey all
__________________
????4776- "nothing takes off panties faster than a 66 mustang"
PICS OF MY STUFF, April 2011
Ebay +23/0
PAYPAL - Timmy Clan Member since 6-12-07 V5.1- almost 4 Rippers, 3 Alias's & a 50 lb box full of Timmy Parts, 12 gold ups
|
|
|
|
|
02-08-2013, 11:13 AM
|
#121
|
|
LOST
Join Date: Aug 2001
Location: Norđwegr
|
|
|
|
|
|
02-08-2013, 11:15 AM
|
#122
|
|
#1 POSTER
Join Date: Dec 2006
Location: 808/818/702
|
Spending lots of money there?
|
|
|
|
|
02-08-2013, 11:17 AM
|
#123
|
|
ShockerRepair.com
Join Date: Mar 2005
Location: PA
|
|
|
|
|
|
02-08-2013, 11:18 AM
|
#124
|
|
#1 POSTER
Join Date: Dec 2006
Location: 808/818/702
|
Just saw that on Facebook. Wonder how well it will be at a spool. But the milling looks good
|
|
|
|
|
02-08-2013, 11:31 AM
|
#125
|
|
LOST
Join Date: Aug 2001
Location: Norđwegr
|
Time to pick up a v1 again  |
|
|
|
|
02-08-2013, 11:32 AM
|
#126
|
|
#1 POSTER
Join Date: Dec 2006
Location: 808/818/702
|
V1 is still my favorite
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
