GOG Enemy

shocktroop · 01-26-2013, 10:25 PM

Safety button's ball bearing sometimes fall out for probably being pushed too hard, which then the button can fall out. It also can get too dirty and gets hard to push (hurts fingers).

The pneumatic disc, I guess, doesn't seat properly at times which causes it to leak. I haven't dealt with the broken ones yet to see why it happens, but Monday I will.

Those are the main two that I've seen with just one week of use... =/

Tim40 · 01-29-2013, 10:56 AM

Some people that received eNMEys at the World Cup were fortunate enough to get ahold of pre-release versions. Since then, the valve/3-way/solenoid has been upgraded and strengthened.

However, GOG offers a lifetime warrant on everything but o-rings, grips and the ASA. So if anything goes wrong, fields can get pretty much everything fixed/replaced at no cost.

-TIM

ottoangel · 01-30-2013, 12:29 PM

Any video of it disassembled?

Tim40 · 01-30-2013, 02:51 PM

GOG will be putting up some full breakdown, assembly and maintenance videos in the next few weeks on their YouTube channel.

7paintball · 01-30-2013, 07:19 PM

Quote:

Originally Posted by Tim40

GOG will be putting up some full breakdown, assembly and maintenance videos in the next few weeks on their YouTube channel.

Very cool Tim those will be great to have at the shop to show people.

BreakShot · 02-07-2013, 09:34 PM

I own a paintball business and I just ordered an eNMEy to try it out (got it today). I also recently ordered 10 FT-12's to try out (in October). I fired the eNMEy and an FT-12 and I was thinking about ordering 10 more of the eNMEy. Unfortunately, when I went to take them apart side by side there was a problem with the eNMEy. It was the wierdest thing; a screw in the ASA was stuck (I got it to move, but turning it farther will shear the screw). I emailed my GOG rep tonight about it, but I am a little turned off by this. I think I'm going to have 10 of each of those markers for the spring to let groups try out so that I can get some feedback and determine which one I will replace my rentals with (I already started getting rid of my T98 rentals).
DIRECT COMPAIRISON: eNMEy is lighter, eNMEy anti chop is better (you have to re-cock the FT-12 but not the eNMEy), the people that I rented the FT-12's out to in the fall thought it looked like a uzi, so I am going with FT-12 is more visually appealing (I expect some will dissagree, but I will see in the spring with my customers), the eNMEy is a little quieter, but it is not a big difference (draw), firing rate is slightly in favor of eNMEy in my hand, but in a younger (weaker) persons hand it may be more of a difference, cleaning time is better on the eNMEy. I am not sure about long term durability, but I expect that Tippmann will win that one in a big way, but the warranty for the GOG marker will help with that (I don't think it applies to commercial/rental ones though). I should mention that not having to repair a marker in the first place is way better than getting a free replacement part! Also, there are some accessory options for the eNMEy, which I haven't seen for the FT-12 yet (perhaps later???). I think the eNMEy will be more consistant over the chrono, but I haven't tried yet. Chrono consistancy is a big contributer to accuracy (chrono (velocity) variation will cause mid to long range shots to over-shoot or under-shoot), so if the eNMEy performs like I think it will (like the eNVy or eXTCy, which appear to have the same regulator) it will be more accurate than the FT-12.
I will give an update in the spring. I might also put out a video. (Stew's Paintball)

caliPBguy · 03-29-2013, 12:48 PM

Does anyone have an update on how the enmeys are holding up as rentals?

CaptainSid · 03-29-2013, 06:02 PM

Quote:

Originally Posted by caliPBguy

Does anyone have an update on how the enmeys are holding up as rentals?

Our field owners here in Canada love them.

More efficient than blowbacks means less demand on compressors

13 BPS out of the box makes kids shoot lots of paint

Lifetime warranty and stupid simple design makes taking care of them a breeze.

No batteries and all mech is amazing. Stock barrel is standard stock barrel.

Drastically lighter and smaller than blowbacks, so younger 'Johnny Paintballer' has a better time and easier to operate.

woda · 05-06-2013, 09:10 AM

I just received an enmey this past week to test out.

I'm thoroughly impressed, this is ceratinly the rental of the future for my field.

Its light, quiet, and "looks cool" so the kiddies feel like they're shooting the same things as the other guys and because of the light short trigger pull, they can shoot a respectable rate of fire.

Great job GOG!

7paintball · 05-06-2013, 10:53 AM

Quote:

Originally Posted by woda

I just received an enmey this past week to test out.

I'm thoroughly impressed, this is ceratinly the rental of the future for my field.

Its light, quiet, and "looks cool" so the kiddies feel like they're shooting the same things as the other guys and because of the light short trigger pull, they can shoot a respectable rate of fire.

Great job GOG!

Love them.. Simply amazing markers.

DC19 · 05-07-2013, 12:44 AM

We got one a few months out and I use it whenever I play rec ball. It is a blast to shoot. I used it all weekend at Super Game without any problems.

RobertSims · 05-13-2013, 03:11 PM

We have 20 in our rental fleet at the moment, and we are having issues with the 3way leaking in almost all of them. Gog informed me that they are aware of the problem and have sent me the replacement parts. Supposedly they have made some minor changes to the 3way. Honestly I can not see a difference, but the new parts work and I have yet to have a problem with the new parts leaking. (however it has only been 2 weeks, so we will see).

On a side note, there is a very small leak somewhere in all of the guns because on Saturday morning (after being left aired up during the week) all of the air tanks are empty.

ottoangel · 05-14-2013, 02:52 PM

For the moment it looks like the new Valken marker is our choice.

stalefishsk8er · 05-14-2013, 06:55 PM

i've never had a problem with my eNMEy

99BPS · 05-19-2013, 11:58 AM

Quote:

Originally Posted by RobertSims

We have 20 in our rental fleet at the moment, and we are having issues with the 3way leaking in almost all of them. Gog informed me that they are aware of the problem and have sent me the replacement parts. Supposedly they have made some minor changes to the 3way. Honestly I can not see a difference, but the new parts work and I have yet to have a problem with the new parts leaking. (however it has only been 2 weeks, so we will see).

On a side note, there is a very small leak somewhere in all of the guns because on Saturday morning (after being left aired up during the week) all of the air tanks are empty.

Hmmmm....you may consider degassing them. The constant strain on internal air lines sounds like the factor causing your leak. BB's don't mind being gassed constantly but I can't see the Enmeys internals being as able to tolerate the constant pressure.

I don't really think there is much of a comparison between Tippy BBs and the GOG marker though, its the only modern mech marker being used for rental use that I would consider worth owning personally.