[VirtuedMini]

What adaptor do I need to use cocker barrells on my BT-4 combat slice?
I have spent three days searching and can't find my answer.

Thanks
Daniel

[EmpireTech]

I believe that as long as the adapter has BT threads then you should be good.

[sumo64c]

The BT4 is A5 threaded....so Autococker to A5 adapter.

[VirtuedMini]

I was looking at this http://www.ansgear.com/Lapco_Barrel_...daptckr-a5.htm

Would this work? The stock BT4 adaptor is not cocker, I want to be able to use my mini's barrels on my BT4.

[sumo64c]

That is the one you want.....

[VirtuedMini]

the barrel adaptor I linked does not work. The tabs on the adaptor are too small, so the clam shells don't hold it.

[sumo64c]

You simply screw your ion barrel into the adapter and then screw it into the bt4. There is absolutely no reason to take the marker apart.

[VirtuedMini]

With the adapter I linked you replace the removable barrel nut. I have to find the one your talking about

[sumo64c]

http://www.rockstartactical.com/prod...ifit-ac-a5.htm



That will most certainly work....

[Tomcat001]

FLASC makes a replacement adapter for autococker.