[klushin]

got the same issue with this sound I relubed everythng twice, changed oring on that black screw, tighten it well but nothing helps. what should I do next?

[SHOOTNPOO]

Reset the reg.
Zero out and start at 1 1/2 turns out

[98Pro]

To get the 4x1 oring on there I usuall roll it over the threads. Using a viton one helps.

[klushin]

Originally Posted by SHOOTNPOO

Reset the reg.
Zero out and start at 1 1/2 turns out

Ok, I'll try it!
Should I do it under the pressure? Need dry fire while doing this?

[98Pro]

I'd do it without air so you aren't creasing you reg seat. Then dry fire.

[lucidvtec]

why would you wanna fix that!!!


I wish my gat made a GOOSE sound everytime it shoot.....so freakin funny!!!

[SHOOTNPOO]

You cant hear anything over the Cannon (ego) you shoot Blake! Hahaha, what was that hes coming to bunker me??? I cant hear you.

[98Pro]

I've never liked egos but I found one I like. A dude locally owned it and tuned it. With my shift barrel on it, it shoots marginally louder and a little kick vs the clone. But gets close to 13 pods so it's good. Best shooting poppet out there is a G6 though.

[blueshifty]

Have you guys tried dow55 on those body seals? That 4x1 seems like a perfect candidate. Dow 55 works wonders on static orings.

[SHOOTNPOO]

NO, I will not recommend DOW55 to anyone whom owns a Macdev. If the Dow moves it way to the noid it will swell up those orings.

The 4x1 is a direct transfer to the noid, so If anyone was to put just a little to much it would go directly to the spool and the noid is done.

[blueshifty]

Dude, you worry too much... I guess that's from being a tech, but I put dow55 between my fingers and kind of smear it into a thin layer. When I apply it to the orings it is almost just the residue on my hand. Applied correctly there's not enough excess to move.

[SHOOTNPOO]

That is you, I dont worry about your stuff due to me knowing your back ground. . Im more concerned about new people coming to macdev and hearing dow 55 on the marker. Dont want them making a costly mistake that can ultimately damage parts internally. I worry only cause I dont want people going to the extreme when most likely its a simple fix.

[98Pro]

Yeah I had this one dude at an MSXL try to tell me you use Dow 55 on the GT. I was like I'm pretty sure you don't want Dow55. HE was like "well whatever lube that swells the orings you want to use".

[blueshifty]

Well... you can't fix stupid. I'm not sure it exists but a lubing guide probably needs to be created for clones seeing as how sensitive they are to overlubing.

[98Pro]

No you can't... And we should. Like what was said in the fb group we need to get a good comprehensive care guide to fixing a clone.

[f8al]

Does your marker sound anything like....mine did? lol (was 100% user error/retardation)

[klushin]

yea, in my case a tone a little bit lower ))

[jwwhite1321]

mine just started to squeak a little, did it effect the marker in any way except making the sound?

[jwwhite1321]

mine sounds like f8als, what is that

[Mark S.]

If it sounds like that it's likely the 4x1 o-ring that is on the base of the black screw that secures the reg housing to the frame. The screw inside the reg housing, not the other silver screw on the outside of it that also secures it to the body.

Make sure that screw is snug as well, if it's loosened up it could also make that sound.

[C-Kidder]

Originally Posted by f8al

Does your marker sound anything like....mine did? lol (was 100% user error/retardation)

Had the same issue today,mine sounded the exact same.
I relubed the 1X4 like everybody said and tightened down my reg tighter this time and it continued so I did as ShootNPoo said and reset my reg pressure to 0 and re chronoed and it went away. I have a feeling its just the gun being over pressurized and telling you noooooooo.