Originally Posted by Webble
yah its getting warmer ever so slowly.. Im just wondering this "bip.." Or the eye sensitivity that you all are speaking of to change.. Just not sure where on this virtue board where to change it unless its somewhere else and im just that much of a nubcakes.. :/ But yah ill have to look into thoae detents too..
Some companies call it Ball In place, some call it other things. Basically it's the time the gun waits, after detecting a ball
....to fire. I think Eye sensitivity may actually be what the stock manual for the proto calls it.
Not to be confused with Eye Delay, or bolt delay which is the amount of time the eyes shut off,after the gun fires, before looking for a ball in the breech.
Don't forget to turn your Rotor down either
SERIOUSLY it will probably have the most effect of any option you have left.
As said.....the PM6 is an older design. It's possible that 180psi operating pressure in there is just plain too much. I hate to just give up on any gun though.
EDIT: Ok I just looked up the manual......Eye Sensitivity is the proper setting. Sorry about that. Stock is 5ms.....I'd go up to 7ms and give it a shot.