[[NA]WARLORD]

Originally Posted by tourneyballer27

forsure thanks for ur input appreciate it.

No prob

Originally Posted by tourneyballer27

what do u recommend I use ive got down33.

As 98Pro suggested, check your bolt guide o-rings. If they need replaced, I suggest getting the Boss Infamous/XSV bolt guide o-rings as replacements. Any form of dow 33 will work. I use Sleek on mine, but then again, the shop has about a 1/2 dozen tubes of it laying around, lol.

[tourneyballer27]

Originally Posted by [NA]WARLORD

No prob



As 98Pro suggested, check your bolt guide o-rings. If they need replaced, I suggest getting the Boss Infamous/XSV bolt guide o-rings as replacements. Any form of dow 33 will work. I use Sleek on mine, but then again, the shop has about a 1/2 dozen tubes of it laying around, lol.

I thought hater sauce was another kind of dow 33. Im thinking of putting my LP reg on and go from there. Slp reg and a infamous seems like its just not working out

[[NA]WARLORD]

If you have any paintball approved oil laying around, drop 1-2 drops in the asa and cycle the Axe about 30-40 shots, this will lubricate the reg internally. Even Empire recommends this every 3-4 cases. It helps with issues like reg creep, etc ....

Don't know about the Hater Sauce, only ever used Sleek prior to the Axe.

[tourneyballer27]

Originally Posted by [NA]WARLORD

If you have any paintball approved oil laying around, drop 1-2 drops in the asa and cycle the Axe about 30-40 shots, this will lubricate the reg internally. Even Empire recommends this every 3-4 cases. It helps with issues like reg creep, etc ....

Don't know about the Hater Sauce, only ever used Sleek prior to the Axe.

I dont at the moment but I know what im buying next haha. Thanks for the help everybody ill have a update soon

[d3kelley]

check you back cap on the bolt guide as well. Boss's website says roughly 1.5 turns out. However, that is just a starting point. Tinker with that at the chrono to see if you can get your gun dialed in

[tourneyballer27]

Originally Posted by d3kelley

check you back cap on the bolt guide as well. Boss's website says roughly 1.5 turns out. However, that is just a starting point. Tinker with that at the chrono to see if you can get your gun dialed in

Im at exactly 1.5 turns out it seems like Its just over kill with a slp im gonna switch regs and see if that works

[98Pro]

Use 33, fit your bolt guide orings to your bolt (find orings that aren't too tight or loose with your bolts inner bore. Push a Allen key down your bolt guide with the back cap out and have your finger where the back cap would be, test how snug the poppet oring is. If your poppet moves with nearly no resistance then replace the oring, it may be too tight and the lower pressure doesn't let it actuate properly. It should be about as snug as a ball in a .003-4 underbore.

[tourneyballer27]

Originally Posted by 98Pro

Use 33, fit your bolt guide orings to your bolt (find orings that aren't too tight or loose with your bolts inner bore. Push a Allen key down your bolt guide with the back cap out and have your finger where the back cap would be, test how snug the poppet oring is. If your poppet moves with nearly no resistance then replace the oring, it may be too tight and the lower pressure doesn't let it actuate properly. It should be about as snug as a ball in a .003-4 underbore.

It seems like its just lack of output pressure cause I raised it to 175psi and its better so i think when I switch regs itll be fine. But ill do that anyway cause im always up for making my gun shoot better. So tight leave it alone, if loose replace it.

[98Pro]

You want all your orings relatively snug. Damn near ight but it shouldn't be excessively tight. We're talking ***** tight not anus tight.

[tourneyballer27]

Originally Posted by 98Pro

You want all your orings relatively snug. Damn near ight but it shouldn't be excessively tight. We're talking ***** tight not anus tight.

Hahaha u sir have made my day. Anyway ya the bolt is fine and I just took the can apart cleaned and lubed the poppit, tested it and its fine.

[sam_cramer73]

most likely your regulator

[tourneyballer27]

Originally Posted by sam_cramer73

most likely your regulator

I swapped out my reg for now and im gonna put some oil down the asa hopefully that solves it

[private_silver]

Uhm, your reg and asa are the same piece on an AXE. Soooo if you already swapped it out and it's not fixed, then it wasn't the reg.

[[NA]WARLORD]

He means the Ninja SLP not the Relay, lol

[private_silver]

Originally Posted by [NA]WARLORD

He means the Ninja SLP not the Relay, lol

Lol I just perused the last couple, must've missed it lol. Why wasn't oiling the first check to do -___-

[tourneyballer27]

Originally Posted by [NA]WARLORD

He means the Ninja SLP not the Relay, lol

Bingo!

Originally Posted by private_silver

Lol I just perused the last couple, must've missed it lol. Why wasn't oiling the first check to do -___-

to catch u up a bit, my axe wasnt cycling properly, so after talking to numerous axe owners it was just to low of pressure with the slp and infamous bolt. I never had access to oil until I found some in a old pb bag I used to use, so ive swapped out my slp reg with a regular ninja reg (shims out), and now have some oil so we'll see what happens once I get air.

[cjanderson_90]

Originally Posted by Clark Gryphyn

Just email Kee, they'll send you a new reg, no questions asked.

agreed on this. i damn near have all the internals for anther axe thanks to them. they are great people and will help out for sure. did i mention this was all free?