Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Thread Tools
Old 02-03-2013, 09:15 PM #1
Join Date: Nov 2011
Geo+ leak. please help

i am new to the geo and i aired it up today with a cp reg on it and it shot a few times then it started leaking heavy, so i took it apart to look at it and cleaned the solenoid gasket and when i put it back together it has a small leak. could that be the gasket is blown or could the noid be blown. it does shoot fine, just leaks. thanks
johntodd is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Old 02-05-2013, 11:43 AM #2
JTpaintballMC's Avatar
Join Date: Nov 2004
Location: NY
 has been a member for 10 years
JTpaintballMC owns a Planet Eclipse Geo
JTpaintballMC has achieved Level 2 in PbNation Pursuit
JTpaintballMC supports Ninja Paintball
Where is the leak coming from?
JTpaintballMC is offline   Reply With Quote
Old 02-06-2013, 05:44 PM #3
Join Date: Oct 2004
Location: Maine
 has been a member for 10 years
Poppy owns a Planet Eclipse Geo
First off if your running a cp reg you are going to want to be extremely carful the purge control valve on the geo is in the regulator collar( unlike the geo 2 and up where it is above the regulator in the body. This will allow the gun to fire when being degased weather it's on or off you should really put the stock reg back on. Secondly if it fires and its leaking just try replacing the gasket if your positive its from the noid. Take the frame off the gun and air it up just to check for sure. And again be really careful with that gun with a cp on it
Shipyard Ale
"livers will fail" ace goodrich

Cotten candy 2014 machine vapor!
Poppy is offline   Reply With Quote
Old 02-07-2013, 05:48 PM #4
egogeo's Avatar
Join Date: Dec 2012
Probably the solenoid housing, they crack extremely easily.
egogeo is offline   Reply With Quote

Thread Tools

Posting Rules
Forum Jump