its on page24 of the dm12 manual.
edit: though the math doesnt seem to add up...
The LPR is now set to
approximately 15 psi. Now turning
out the retainer 360 degrees
counterclockwise will increase the
pressure approximately 10 psi.
For example, turning the retainer
4 complete turns out will set the
pressure to approximately 75 psi.
if a complete 360* is 10psi, 4 turns out would put it at 55psi.... weird... another dye misprint probably.
Last edited by jojo750 : 02-04-2013 at 07:54 PM.