So I have a ccm t2 and am having a problem, which might not even be one
So to get my t2 down to the mid 250's, I have the ivg all the way out and also my reg screw is coming out of the bottom about 1/4th of an inch.
And when it was in the 280's and I wanted it a little lower like 5-10 fps, I would have to turn it about 3 turns to get there
sweet spot your reg and never touch it after that, you should only use your IVG for adjusting your velocity. the easy way is to set your reg to 300psi, back out your IVG all the way, and use your IVG to set your velocity.
No remorse, no regrets, never give up
Gun Tech for NRG^2
Feedback~ PBN +97/0/0|Ebay +116/0/0