Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 02-03-2013, 09:15 PM #1
johntodd
 
 
Join Date: Nov 2011
Geo+ leak. please help

i am new to the geo and i aired it up today with a cp reg on it and it shot a few times then it started leaking heavy, so i took it apart to look at it and cleaned the solenoid gasket and when i put it back together it has a small leak. could that be the gasket is blown or could the noid be blown. it does shoot fine, just leaks. thanks
johntodd is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 02-05-2013, 11:43 AM #2
JTpaintballMC
 
 
JTpaintballMC's Avatar
 
Join Date: Nov 2004
Location: NY
JTpaintballMC owns a Planet Eclipse Lv1
JTpaintballMC has achieved Level 2 in PbNation Pursuit
Where is the leak coming from?
JTpaintballMC is offline   Reply With Quote
Old 02-06-2013, 05:44 PM #3
Poppy
 
 
Join Date: Oct 2004
Location: Maine
Poppy owns a Planet Eclipse Geo
First off if your running a cp reg you are going to want to be extremely carful the purge control valve on the geo is in the regulator collar( unlike the geo 2 and up where it is above the regulator in the body. This will allow the gun to fire when being degased weather it's on or off you should really put the stock reg back on. Secondly if it fires and its leaking just try replacing the gasket if your positive its from the noid. Take the frame off the gun and air it up just to check for sure. And again be really careful with that gun with a cp on it
__________________
Poppy
Shipyard Ale
"livers will fail" ace goodrich

sl94!
http://www.pbnation.com/showthread.p...2#post78979422
Poppy is offline   Reply With Quote
Old 02-07-2013, 05:48 PM #4
egogeo
 
 
egogeo's Avatar
 
Join Date: Dec 2012
Probably the solenoid housing, they crack extremely easily.
egogeo is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump