Luxe Standard 2.0 settings

inboxfull · 02-01-2013, 08:01 PM

HI,

i know its been discuss alot, (sorry) but too much information got all confused on 1.0,1.5 and2.0.

Need information, what to set on the Luxe 2.0 markers. direct answer.
what are the few things should i tune and adjust.

i highly appreciate your help, if you could list them

INFO: THIS QUESTION BEEN ASKED A MILL TIMES ALREADY. STOP CONTINUE READING IF IT WASTING YOUR TIME.

OR Baller, CST · 02-02-2013, 09:40 AM

Just set your bps to whatever you need and shoot it. No need to touch anything else until you're a few cases in.

inboxfull · 02-02-2013, 09:51 AM

bought used Luxe. tried about 2 pods. ball break. and the paint came out of the hopper and the gas as well, about 2 seconds out of the hopper.

What exactly does it means?

sai · 02-02-2013, 10:02 AM

Higher ur dwell, take out the FT.
Need to change some Orings for the leak... 2 on bolt, one on bolt guild and one on bolt cane is at least u need.
Ps: can pm ur email I can show u what size of those Orings. GL

inboxfull · 02-02-2013, 10:08 AM

no problem. i bought a rebuild kits. and Dwell set to ? and FT..? m not sure what exactly FT..

poopresearch · 02-02-2013, 11:46 AM

Read the manual. You are wasting people's time by asking them questions you could easily (and more effectively) answer by reading the manual.

As for the paint coming out of the hopper, is there an oring in the front of the breech? If not, that's your problem.

Ty29 · 02-02-2013, 02:05 PM

Doesn't FT in make it softer on paint though? Idk about removing it, but it's worth testing it out.

inboxfull · 02-02-2013, 07:38 PM

Quote:

Originally Posted by poopresearch

Read the manual. You are wasting people's time by asking them questions you could easily (and more effectively) answer by reading the manual.

As for the paint coming out of the hopper, is there an oring in the front of the breech? If not, that's your problem.

First if all, the point of open this tread is to get the direct answer and yes im having a problem with the Luxe coming out of the hopper which i require help from other members and if m wasting your time. please dont reply it. let them answer if they want or feel free to type in the keyboards.

Thank you.

inboxfull · 02-02-2013, 08:01 PM

Quote:

Originally Posted by sai

Higher ur dwell, take out the FT.
Need to change some Orings for the leak... 2 on bolt, one on bolt guild and one on bolt cane is at least u need.
Ps: can pm ur email I can show u what size of those Orings. GL

Highly appreciate your help on the diagrams and email buddy

specopsdeath2 · 02-02-2013, 08:08 PM

Dont take this as me being a dick, but you need to write your sentences better so we can understand what your problem is.

Dwell 14 if not too cold out.
FT out.
Tune Manifold at the field.

Explain better what you mean by "paint came out of the hopper and the gas as well, about 2 seconds out of the hopper."

FT is a screw that doesnt need to be put in. hard to explain, so read the manual and itll show you

inboxfull · 02-02-2013, 08:33 PM

hi,

Non taken. got it without the manual. only the marker and case.

During shooting suddenly ball break the paints came out of the hopper and the air as well from the tanks in about 2-3 seconds

ive no idea why the Air Continuously vented through the Hopper. i checked theres no sign of leaked. is it normal 68/45 tank. the indicator from 2 to 0.6 on only 1 pod?

UnrealS7 · 02-02-2013, 10:00 PM

Quote:

Originally Posted by inboxfull

hi,

Non taken. got it without the manual. only the marker and case.

During shooting suddenly ball break the paints came out of the hopper and the air as well from the tanks in about 2-3 seconds

ive no idea why the Air Continuously vented through the Hopper. i checked theres no sign of leaked. is it normal 68/45 tank. the indicator from 2 to 0.6 on only 1 pod?

I believe what he means is he shot a couple..got a nasty ball stack break up into the hopper and then the tank/Asa continuously vented air out after that?

It sounds like your tank might need a rebuild...as well as checking your input pressure on your hpr. Maybe even double check your frame orings tho they rarely are the problem.

inboxfull · 02-03-2013, 12:38 AM

Quote:

Originally Posted by UnrealS7

I believe what he means is he shot a couple..got a nasty ball stack break up into the hopper and then the tank/Asa continuously vented air out after that?

It sounds like your tank might need a rebuild...as well as checking your input pressure on your hpr. Maybe even double check your frame orings tho they rarely are the problem.

Thank you !! yes correct. the air vented through out the hopper. is kinda rare.
i dont know if m the only person having this kind of problems.

i guess gonna change all new oring.

Ty29 · 02-05-2013, 08:59 AM

So the entire tank vented after paint broke?

inboxfull · 02-05-2013, 04:37 PM

Quote:

Originally Posted by Ty29

So the entire tank vented after paint broke?

only in about 2-3 seconds it vented before i had to shut/close/ cut off the Air supply from the Tank. the air was so strong that caused the hopper filled with paints ( paint from the ball break)

It could have been the entire tank vented, if i didnt shut off the air supply.

Ty29 · 02-05-2013, 09:26 PM

How do the o-rings on the bolt look? Perhaps a bolt issue, something causing it to stay forward and vent air?

You could call DLX and test their knowledge, they will know.

SithKnightBB · 02-06-2013, 07:06 PM

Could be a simple explanation. If the eyes were not properly functioning and the bolt got on the broken ball and did not return to the back position then it would continue to vent air. Eyes could be dirty to begin with or from the broken ball or could be an eye delay issue.

I had this happen several times with a shocker that had no eyes. at high rates of fire the bolt would get stuck on a ball that had not made it all the way into the breech and it would vent air.

rexisme · 02-06-2013, 09:53 PM

http://luxepaintball.com/downloadz/

You guys are having a hard time because I'm almost willing to bet he's not very fluent in english.... But, there you go OP .... you can get yourself a 2.0 manual.

inboxfull · 02-07-2013, 12:08 AM

Quote:

Originally Posted by SithKnightBB

Could be a simple explanation. If the eyes were not properly functioning and the bolt got on the broken ball and did not return to the back position then it would continue to vent air. Eyes could be dirty to begin with or from the broken ball or could be an eye delay issue.

I had this happen several times with a shocker that had no eyes. at high rates of fire the bolt would get stuck on a ball that had not made it all the way into the breech and it would vent air.

I think youre mightbe right. it could be. gonna test it again and hope its not gonna ball break again

inboxfull · 02-07-2013, 12:11 AM

Quote:

Originally Posted by rexisme

http://luxepaintball.com/downloadz/

You guys are having a hard time because I'm almost willing to bet he's not very fluent in english.... But, there you go OP .... you can get yourself a 2.0 manual.

Thank you for the Manual. gonna download it once i have a PC with me.

yup, English is my second language. sorry about it, if your guys having a hard time to understand me.