[mr.gnarly]

Till now ive never really liked psp but ive given in.

I have 2 lcds and an IR3. The LCDs are pmr boarded.....What would be the easiest way to make one of these psp ready...

None of em have eyes...Im pretty sure thatlll have to be changed.

[dr.strangelove]

Set the MROF to 12 and mode to PSP. I don't think you need eyes enabled to ramp on any of the PMR boards. Here's the manual for the stock board: http://www.dyematrix.com/manuals/Pro...AIL_Manual.pdf

[Trevor]

You'll be fine without eyes. I have played with a 15bps ramp on a blind LCD and had no chops. I was using a Halo v35 at setting 4.

[mr.gnarly]

cool thanks again guys.

[STLNATION]

I'm trying to buy a stock lcd angel. what wild be the easiest easy to get eyes and psp mode?

[trancer23]

easiest way is to get a pmr mod and forget eyes.

[sledneckforlife]

Originally Posted by dr.strangelove

Set the MROF to 12 and mode to PSP. I don't think you need eyes enabled to ramp on any of the PMR boards. Here's the manual for the stock board: http://www.dyematrix.com/manuals/Pro...AIL_Manual.pdf

Your correct- you don't. It's hilarious to see an old girl working up a sweat on psp 12.5!!

Rotors are nice loaders for this.

[Japy]

Id definitely recommend a rotor or a z2 at least, and don't run the hopper dry if you can help it.. Couple dry shots while that lost ball falls down the feedneck is a great way to blow a ball up.

Sled you're gonna love when I finally put my dark together.. I'll do a video of it on uncapped semi, it shoots like 20bps easy. LCD going stupid fast

[Winnebago]

Ken used to say LCDs are pneumatically capable of 25bps.

[Trevor]

Originally Posted by Winnebago

Ken used to say LCDs are pneumatically capable of 25bps.

I believe it. I want to pick up one of those q-loaders to test the numbers on one of my LCDs. Its gotta be in the 20s somewhere because it shoots without dropoff or hiccups using a rotor and halo.

[Japy]

After 20bps you're gonna be limited by the regulator on your tank and the mini-reg's recharge rate.

On my shocker if I uncap ramp it, it chokes out like crazy with any ninja regulated tank I've tried and doesn't cycle as fast as when I use my Crossfire tank regulator.

Gonna be hard pressed to really sustain over 20bps anyway with any loader for very long. Have fun changing Q-loader pod things in 2 seconds.

Try it with a pinokio, allegedly they feed as fast as rotors/z2's and have those HUGE nose cones.

[Trevor]

Well, the q-loader would be for testing purposes. I can't imagine trying to play anything except woodball with one.

There's a YouTube video with a q-loader feeding a viking that is shooting like 33 bps or something silly. The air system was a dynaflow (pat's favorite).