Mini Virtue board getting hot
So I recently bought a used Invert Mini and at first it was shooting just fine. But the other day it started leaking really bad. So I took the marker apart and didn't see any bad o-rings or obvious signs of why it would be leaking. So I put it back together and went to reset the solenoid. But after several trigger pulls, the solenoid wasn't clicking. Then I noticed that the board was really hot, as well as the battery. I turned it off real quick and let it cool down. After a while, I turned it back on and the board still came on, but it still got hot really fast so I pulled the battery right back out. I also noticed that it was flashing blue, indicating that the eyes sensed something, when there was nothing in the breech. I took the marker back apart to see if I didn't put it back together right but I put it back together exactly the way it was before. Can someone help me out? The board is a Virtue board, not the stock one. I don't have the money to replace the board so I'm really hoping it isn't burnt out. I just don't know what would've caused it to get burnt out. Any help would be appreciated. Thanks.
Obama Must Go