[NinJaaaaaaaaaah]

Holy **** balls, I thought you died.

[Jurd]

Trans goes in this weekend.

[Jurd]

And shes running and pulling hard in third!

I have lots of clean up work to do.

[Mustang7302]

Wow, this project is still going?! Keep up the fun man!

[SA_4_LIFE]

nice, its good to hear this thing is back and operational again, get some updated pics for us

[Jurd]

Thanks i almost didnt update this.

Got some clean black carpets for the car. Just put the front half in. Leaving the back part out until i fix all leaks.



The backend is raised up a little to keep the driveshaft from saying hi to the DS tunnel. Planning on cutting out the ds tunnel for some fresh sheet metal. This should give me the room i need to get the ride height i want.

Im doing my exhaust this weekend after that ill take some pictures of the exterior.

[Jurd]

Exhaust is not one of those things i like to spend money on. Some old aluminized pieces mixed with some plain mild steel straight bits welded together with our flux core 140. Muffler is dynomax, cat is silicone intakes fake.

[Jurd]

Once i cut the floor up and fab a new ds tunnel i can drop the back down about another inch.

Next to my buddies disco.

[Alan777]

He willingly bought a discovery? That poor son of a *****

Also, videos

[adgergewh]

what's the surface roughness like on those salvaged pipes?

[F1VENOM]

Originally Posted by adgergewh

what's the surface roughness like on those salvaged pipes?

[Jurd]

No where near ready for videos haha

I do not have a reliable timing mark right now. Not sure if my base timing is correct or not i have left the spark map very conservative. In other words is not running nearly as well as it should be.

Also i have raise the rear suspension over an inch trying to keep the drivehsaft from rubbing durring WOT pulls. Obviously this is a bandaid. Springs arent that soft 300#. I need to cut the floor out and build a larger tunnel for the drivehsaft. I wanted to lower the back anyways.

[Hammi]

Just cut out the whole floor.