DX Drone FAQ

SHOOTNPOO · 07-15-2012, 09:27 PM

The 1x15 is the thin oring in front of the two 016 orings on the bolt. This oring is a bumper oring helping it from slapping into the front Keg. I recommend getting another one installed. This over time could damage the front keg by hitting the inside and possiably damaging both the bolt and the keg.

GMF · 07-24-2012, 12:02 PM

Quote:

Originally Posted by timbertiger20

Well it runs at 100 PSI........so as long as your double that your fine! I've heard claims that a lower pressure will increase efficiency.......but I don't know! Also I though Ninjas were adjustable?

I just got a Drone last week and new tank for ninja they said to run it at 550 so thats why i had them set the reg for.

Waffzy · 09-27-2012, 09:12 PM

Are the regulator threads proprietary?

Mark S. · 09-27-2012, 09:59 PM

Quote:

Originally Posted by Waffzy

Are the regulator threads proprietary?

Nope the regulator threads are standard size.

marceldacs · 11-22-2012, 02:15 AM

Will i have to mess with any factory settings on my new drone dx? This includes the regulator and board setting. Should i get rid of all factory lube and relube it?

Deathstick_Davis · 11-25-2012, 09:42 PM

Good thread here for you to read:

http://www.macdevmilitia.com/showthread.php?tid=257

Willtgm · 01-09-2013, 03:51 PM

So I was in the middle of a game with my drone and all of the sudden a few of my shots dropped off then it was shooting normaly then the shots were going so slowly that they weren't getting out of the barrel. Could you please help me out?

SHOOTNPOO · 01-09-2013, 08:40 PM

Make sure you are lubing prior to the day of play and if you are sure lubing wasnt the issue swap out the two 016 switch orings.

Rancid1845 · 01-09-2013, 09:32 PM

Quote:

Originally Posted by SHOOTNPOO

Make sure you are lubing prior to the day of play and if you are sure lubing wasnt the issue swap out the two 016 switch orings.

So I should relube the day before I play? Even if i've cleaned and lubed after my last day of play?

SHOOTNPOO · 01-09-2013, 09:43 PM

Depends on what lube you use and how often u play. Best rule of thumb is the night before/day of so you dont have dry sticky lube. Cause if dry you can damage orings so better safe then sorry.

Cantide · 01-31-2013, 02:18 PM

Just picked up a new drone with the half plastic drive train. What else was changed when they changed from the all metal one?

SHOOTNPOO · 01-31-2013, 06:52 PM

We just released the new GT solenoid that goes into the drone Upgrade, New PSP flash software. Thats about all.

maxfaublas · 02-04-2013, 09:02 AM

Hi people, I´m having some consistency issues with my drone, I´ve followed all the recomendations but seems like my HPR filter is too dirty with lube, How can I correctly clean it?

Thanks for the help.

SHOOTNPOO · 02-04-2013, 10:28 AM

Any dish soap will work. Just dry off prior to reinstalling.

maxfaublas · 02-04-2013, 01:28 PM

I didn´t know that, thanks shoot!

Max

jaywhyy · 02-28-2013, 10:39 PM

Any way for an older DX to update to the new 2013 board firmware?

SHOOTNPOO · 03-01-2013, 08:29 PM

Yes, we have to flash it for you.
Please call aggressive sports
1888 899-3772

Flash free of charge just pay shipping both ways.

Deathstick_Davis · 03-02-2013, 03:28 PM

If in Canada can get in touch with with me at sales@smackballin.com for the Upgrade also

jaywhyy · 03-05-2013, 06:12 PM

What differences should you expect w/ the 2013 solenoid vs the old?

SHOOTNPOO · 03-05-2013, 07:03 PM

More reliability, softer shot, better efficiency and better consistent shots.

mkbushwacker · 03-22-2013, 09:30 PM

Quick question. Been threw the whole trouble shoot and cant solve my dx's major fsdo and pressure loss problem. In Boomers maintenance video at about 5:10 in he flicks the bolt forward by swinging it a little. So the bolt is supposed to easily flick forward like that? Because mine doesn't budge at all. Thought it could have been an over lube problem or oring problem but all orings were replaced. Just got it back from macdev and still have this problem. Thanks.