[tacpiztols]

Hey guys,

so im firing my Etek 3 LT in my backyard, and i take a shot, and nothing comes out, i take another shot and nothing comes out again, i see air come out but no ball is going forward. I pull out the pooty moded cure 4 bolt, and see that the double o-rings right behind the face of the bolt are gone and stuck in the breech. I retrieve them and put them back on. Before I test fired, I pulled out the bolt and lubed all the orings that were on the bolt, this also happened to me last saturday when i first tried to chrono, i needed to replace my o-rings again, any reason why the o-rings are coming off of the bolt? Also, if I lose these O-rings, what size are the o-rings that belong on the cure 4 bolt?

[Nicky T]

Without seeing the modified bolt there is no way of saying.

The size for these o-rings is 015 NBR 70.

Nicky T

[amesago91]

Im Having The Same Problem With An Ego 10, I Upgraded The Bolt To The Cure 4 And Those 2 Orings Keep Coming Out Of The Marker Every 50+ Shots Aprox.

Did You Solve It Already ? Does Anyone Know How To Fix This ?

[Mason74]

Originally Posted by amesago91

Im Having The Same Problem With An Ego 10, I Upgraded The Bolt To The Cure 4 And Those 2 Orings Keep Coming Out Of The Marker Every 50+ Shots Aprox.

Did You Solve It Already ? Does Anyone Know How To Fix This ?

I know this may seem redundant, but check with pooty paintball directly, my guess is that probably may know the fix, or it's likely they have heard of this problem, and may know the solution. Whereas here, u have to hope that someone already has had the problem...

I know it defeats the purpose of the forum, but if u could then post their answer that would be awesome.

[abenguyen]

I would check your detents and clean your breach out. Afterwards, place one drop of oil in each detent slot. That could be the source of your problems.