[iCantSnapShoot]

The Lpr on my Dm won't come out. I always properly disassemble it prior to attempting to remove it. I tried as hard as I could with a needle nose plier and even tried airing it up without the middle screw(used to hold it in) in hopes to have it shoot out to no avail. Dye says to service it every 15 cases, and I'm up in the 100 range and it's starting to feel rough. Any help is appreciated. Thanks

[Mason74]

Originally Posted by iCantSnapShoot

The Lpr on my Dm won't come out. I always properly disassemble it prior to attempting to remove it. I tried as hard as I could with a needle nose plier and even tried airing it up without the middle screw(used to hold it in) in hopes to have it shoot out to no avail. Dye says to service it every 15 cases, and I'm up in the 100 range and it's starting to feel rough. Any help is appreciated. Thanks

can u run a dental pick all the way thru the middle of the lpr, and tug on the piston and pull it out?

[EpikPb_]

http://www.youtube.com/watch?v=B85JixJqWSw

go to 17:00
He says it's the back most screw, not the middle one.

[iCantSnapShoot]

Well **** wrong screww

[MstrKey]

LOL. It can still be tough to pull out sometimes even when you take the proper screw out

I just used a longer screw that fit into the adjuster screw threads. Screw the longer screw into the adjuster screw spot then use it as a handle and pull the LPR out.