[Mason74]

I already upgraded my board and my feedneck cuz the stock one sucked, and I was wondering what else I could do....

I know I can upgrade the bolt to a billy wing bolt. Anything else?

[tlmiller]

Lots else. The question should be "anything else useful?". And IMO, the BW bolt is overpriced for what little it does. The only "upgrades" I put into my PM8 was a different on/off (I like center exit), board (I like OLED), trigger (I hate Dye triggers), and an eigenring which unfortunately didn't work with my PM8.

[JoshC90]

billy wing bolt cost way to much for the extra pod or so you get IMO, just use a bigger tank lol

Feedneck is really the only thing that needed upgrading, rest is cosmetic or personal feel such as trigger or on/off. I just have a CP feedneck, dont see a reason to change anything else

The PM8 is a high end gun, there isnt really any "upgrades" performance wise.

[Mason74]

Originally Posted by tlmiller

Lots else. The question should be "anything else useful?". And IMO, the BW bolt is overpriced for what little it does. The only "upgrades" I put into my PM8 was a different on/off (I like center exit), board (I like OLED), trigger (I hate Dye triggers), and an eigenring which unfortunately didn't work with my PM8.

I have the 7th element oled bd and love it, i'm fine with the on/off, and yeah, I am not a fan of my trigger. I wasn't sure if maybe there was something else that I had not read about or seen.

Originally Posted by JoshC90

billy wing bolt cost way to much for the extra pod or so you get IMO, just use a bigger tank lol

Feedneck is really the only thing that needed upgrading, rest is cosmetic or personal feel such as trigger or on/off. I just have a CP feedneck, dont see a reason to change anything else

The PM8 is a high end gun, there isnt really any "upgrades" performance wise.

Yeah, I don't worry about efficiency all that much, tbh (unless I am way off), which is why I never bought the bolt. The trigger is the only other thing I might change, and that would only be to maybe find a smoother-feeling one.

[NL2]

i seriously cannot ask for a better backup marker... tadao board + critical trigger... i'm about to get an eigenring to try and smooth out the shots as much as possible, also maybe a dye 45degree angle hyper3 later for looks would be nice, but i already have the front port ASA so it should do for now

[Mason74]

Originally Posted by NL2

i seriously cannot ask for a better backup marker... tadao board + critical trigger... i'm about to get an eigenring to try and smooth out the shots as much as possible, also maybe a dye 45degree angle hyper3 later for looks would be nice, but i already have the front port ASA so it should do for now

Funny - my pm8 is the same color.

[JoshC90]

Mines black to blue, loves fades. They dont do them enough anymore

[tlmiller]

Originally Posted by JoshC90

Mines black to blue, loves fades. They dont do them enough anymore

That's what mine is.

[frostwalrus9]

feedneck was a must, and a different board was a good call (I have a virtue oled in mine), a better trigger and a better barrel are really helpful too, one you have all that you're pretty much set

[Mason74]

Originally Posted by frostwalrus9

feedneck was a must, and a different board was a good call (I have a virtue oled in mine), a better trigger and a better barrel are really helpful too, one you have all that you're pretty much set

I've been looking at the critical triggers, actually.

I also recently added a dye ul airport as the asa, and I ordered the 45 degree feedneck for the hyper 3, which, after emailing dye, I was told should fit the stock proto reg. Aside from that, I use dye UL's for barrels.

[CrazyHarry]

I don't like the shape of the Critical trigger... I really like the shape and adjustability of the Ironman Trigger. However, I have been looking at violent series triggers as well.

Feedneck is a must, the NT and DM feednecks are pretty damn nice... they are so low, I love it.

I really enjoy the Virtue OLED board I have, the ability to turn off the auto shutdown is a must for any woodsballer.

[JoepSantaniello]

just for ergonomics I have a DYE Hyper 3, I got a slightly more consistent shot but not much, but its all personal preference

[Mason74]

Originally Posted by CrazyHarry

I don't like the shape of the Critical trigger... I really like the shape and adjustability of the Ironman Trigger. However, I have been looking at violent series triggers as well.

Feedneck is a must, the NT and DM feednecks are pretty damn nice... they are so low, I love it.

I really enjoy the Virtue OLED board I have, the ability to turn off the auto shutdown is a must for any woodsballer.

Yeah, I had a blast when I removed the old feedneck... That was fun. Not.

Anyway, I like the shape of the critical trigger. So prob go with that, and I hear it's much smoother, too.

[frostwalrus9]

Originally Posted by Mason74

Yeah, I had a blast when I removed the old feedneck... That was fun. Not.

Anyway, I like the shape of the critical trigger. So prob go with that, and I hear it's much smoother, too.

The critical trigger is what I have for mine as well as UL barrel and they also both work great too, sounds like you pretty much just have my setup and I like it a lot so far, hopefully you do too

[Mason74]

Originally Posted by frostwalrus9

The critical trigger is what I have for mine as well as UL barrel and they also both work great too, sounds like you pretty much just have my setup and I like it a lot so far, hopefully you do too

Yep. If the 45 deg swivel reg adapter fits I will post pics once I have it done.

[CrazyHarry]

Originally Posted by Mason74

Anyway, I like the shape of the critical trigger. So prob go with that, and I hear it's much smoother, too.

If you like the shape, go for it... it's very smooth and had, virtually, no side to side play. I think it is a far superior trigger... I just couldn't get used to the shape.

[98Pro]

Get a BL ASA, Pooty polished bolt w/ hand fitted orings (he'll do it on request, also have him put some oring types of his expertise in there, he knows best.

[Mason74]

Here it is -

Pm8, cp feedneck, dye ul airport Asa, dye 45 degree swivel reg adapter, seventh element pathfinder OLED board.