LED Lens

Crazy Train · 01-27-2013, 02:47 PM

Does anyone know where I can find an LED lens for the LED backplate? Thanks.

Trevor · 01-27-2013, 11:13 PM

You won't find one unless you buy an old LED and cannibalize the parts off of it. You could do what adrenalin use to do to guns with the skull eyes...

Here's my Dark LED:

dr.strangelove · 01-28-2013, 12:42 AM

You can probably just swap a standard LED holder in there if nothing else.

http://www.radioshack.com/family/ind...goryId=2032297

(can't recall the size of the back plate LED off hand, but 3 mm holders are easy to come by online too)

Crazy Train · 01-28-2013, 11:45 PM

I'll give the LED holder a shot. Thanks.

silverflip · 02-13-2013, 04:44 PM

Hello,
I also broke my lense on one of my angels, I think i may have found a place that sells them. I waiting or an order to come in. If it works out, I'll send you one. I hope you did not drill out your backplate yet?

Crazy Train · 02-13-2013, 06:17 PM

Nope, didn't drill it out. LED is still exposed. Thanks!

silverflip · 02-21-2013, 01:12 PM

Well lenses came in, but they were to big. They where 5mm need 4mm. I'm on the hunt for them. Will post when I find them.

Crazy Train · 02-21-2013, 10:24 PM

That's a bummer. Would you be able to pm me the info so I can help look too?

dr.strangelove · 02-21-2013, 11:57 PM

Any chance this would work: http://www.radioshack.com/product/in...ductId=2062568

I know the plastic lens is red rather than clear, but the LED size is 4mm.

trancer23 · 02-22-2013, 11:44 AM

http://www.mouser.com/ds/2/215/M60p90-20204.pdf

4.3mm

Crazy Train · 02-22-2013, 03:36 PM

Thanks! Just ordered some. Hopefully this will work!

trancer23 · 02-22-2013, 03:50 PM

my google fu is strong. Hope they work as well.

silverflip · 03-01-2013, 02:05 PM

Well,
My order for lens came in today, perfect fit. Could be a original part. Funny thing is I ordered 2 got 1. Anyway I ordered from Fry's Electronics online store. Part number is : B4301F1/5. It's actually a dual color green/red LED with lens.
Looks to be the same size as original, but don't have the original specs for led so I did not try it. The lens snapped right into place. Cost 1.59, yes a buck 59. Punch in part number and you can view a picture of it, on Fry's site. I hope I did not break any posting rules when I listed the store I got they part from. Just trying to help.

Crazy Train · 03-01-2013, 04:15 PM

Thanks for the headsup. The lens from mouser was a perfect fit too!