[brock_averill]

He already does.....I have seen all of these items from him. Getting him to make you some may be a different story though. lol

[TheePsycho]

I know he does as well. I've seen all of the pictures as well.

[MeuroM]

Love you guys too.
I did get that ugly JMJ test body FL Swirl "JMJ Factory" Viking afterall. I could mill an ugly EvilM like that, could be funkey.

[phantommaggot]

So I got a $50 promaster today that needs a little work.

But it should get me back in the game. Along with my cocker.

There is a PMR UL frame on ebay right now for pretty cheap depending on how the bidding goes. I cant get it right now since I've been out of work for a couple weeks but I thought I'd give a heads up.

[Enfamous13]

As long as you get to get out to play, it doesn't matter what you rock.

[phantommaggot]

Originally Posted by Enfamous13

As long as you get to get out to play, it doesn't matter what you rock.

Damn straight. I've always liked ICD anyways. High quality American made (for the most part) goodness.

I also have my superbolt, which I got together last week as well. It came out pretty nice. Not exactly how I wanted it to end up but it's legit for a gun have about $30 in (After Buy/sell of other stuff and if you don't count milling)

And I came across a defiant today, The guy ended the auction and gave me a bit of time to throw some money in paypal. (my play money has to pay a ticket this week ) But if it works out I'll get something I've wanted since I made the mistake of buying a brand new, don't hate, shocker turbo..

Teaser Pic

[VooDoo Head]

You may want to lob a call over to Splattman Paintball in Jacksonville, FL if you are lookinf gor some classic guns like that. Last time I was in there, he had several Defiants, Several impulses, and a host of classic old school markers.

http://www.splatmanpaintball.com/

[phantommaggot]

Thanks for the heads up
Honestly, I wont buy it if he cant find the stock barrel. But I LOVE that anno. It's the only reason I considered it.

[TheePsycho]

Looks like the Evil M on McB sold a couple of days ago.

[phantommaggot]

Was it viking59s?
Edit: Why yes it was...

I sent some messages again today about a couple different frames.

Did anyone on here get the PMR frame for 70 on ebay?

[Ruler_Mark]

[phantommaggot]

Small stupid discovery today.

I bought a cheap o promaster. I have it torn down so I can clean it up..

Anyways, The kila lite board fits in my cyborg. Mounts right to the microswitch mounts, has enough room for the harness connector, and probably enough room for the battery and noid to fit the frame. depending on the noid anyways.

Another cheap option for people building on a budget. Could hit up ICD-O and talk to 'Nobody' about a harness.

Makes me wonder if some of the flat top frames would work with the little board and a small noid in the frame..

One more dumb thing, since my post is still last..
Will a standard paintball board run this little noid here
Little Noid at ASP

[cfos00]

Yes, it is the standard noid for egomag frames. Works great in them. It can handle about 70 psi.

[phantommaggot]

That is pretty sweet.
Could you use that in a Evil M build? use any frame you wanted.. lol

[MeuroM]

70psi max is borderline for this application. I run my vikings/evilm at 75psi, excal at 70psi. It can go a little lower though.

[phantommaggot]

Do they blow past 70? or does it just wear them faster?

Could you use a higher dwell and lower the pressure?

[cfos00]

No idea, just know what their operating pressure is listed as in the specs. You never need it near that high with an egomag. It's a good question though. They're absolutely tiny.

[Gryphon43]

With 3 barbs, it doesn't lok like that solenoid will vent at all. Someone correct me if I'm wrong.

[phantommaggot]

How do normal 3 barb noids vent?

[63VDub]

According to the spec sheet, center port is supply, top is output and bottom is exhaust.

[phantommaggot]

So it wouldn't work an a normal ram anyway. Only on something like a FASOR.