[juztinrf]

Got an older pmr with a leak where u screw the bolt in at.. however its got me confused because its great, shoots fine, doeant leak or do anything out of ordinary until i staty walking the trigger..then its starts blowing air out and and balls obviously stop flying because there is t any pressure with most of the air leaking out of the back. Idk im just confused as why it shoots great ball after ball at a slow rate of speed but it dont start until you begin to rip on the trigger!!!????

[Bump_Pitch]

Sounds like bolt stick. Make sure you lube your bolt so it can easily slide in and out of the can

[juztinrf]

Removed bolt..wiped it down completely..lubed it up with my techt gunsav and its still leaking. Idk anything about pmr gun..its my buddies who bought it from someone..now its actually leaking no matter what not just when ur walking the trigger..i have a g3 but everything seems normal inside with the bolt and what not..when u wiggle the regulator back and forth and stuff it seems to stop leaking in the back of the bolt but just comes back when u stop....idk im freaking lost.

[Bump_Pitch]

If its leaking out of the back cap you have two options

A: you didnt line up the hole in the bolt with the air hole in the body

B: there is a busted oring on the back side of the bolt

[juztinrf]

To ensure the hole in the bolt lines up with the hole in the rail u leave one of those screws in the back cap sticking out and it lines up with the notch in the back where the bolt cap screws into right!?

[Bump_Pitch]

Originally Posted by juztinrf

To ensure the hole in the bolt lines up with the hole in the rail u leave one of those screws in the back cap sticking out and it lines up with the notch in the back where the bolt cap screws into right!?

Yes, I think you are saying it right