Homemade sear egrip circuit

evan_ellerbe · 01-24-2013, 11:02 PM

Currently working to modify old spider clone grip frame into sear pin egrip frame using bare bones supplies . Have already created cheap efficient circuit and can post a diagram for anyone who is interested . Also most of mechanics are done

florios · 01-25-2013, 12:13 AM

pics or this thread is useless

evan_ellerbe · 01-25-2013, 12:20 AM

I. Can post a diagram of the circuit jut wasn't sure if anyone was interested

evan_ellerbe · 01-25-2013, 12:31 AM

How do I put pic?

R-M-I · 01-25-2013, 01:13 AM

You upload your photo to flickr, photobucket, imgur or whatever photohosting-service you wish..then you simply paste in the IMG-link to that photo.

So... You made a circuit that would control fireingmodes etc?
What PIC did you use? And what language was the source written in?

evan_ellerbe · 01-25-2013, 01:22 AM

No it's bare bones no shot modes no psp just uncapped semi auto . While it has no extra modes it also uses no complex parts like logic circuits or micro controllers

evan_ellerbe · 01-25-2013, 01:24 AM

It's just supposed to be a cheap mod done from scratch, sear design , not a valve solenoid . Just for fun

evan_ellerbe · 01-25-2013, 01:25 AM

evan_ellerbe · 01-25-2013, 01:28 AM

This is it in a diablo wrath with a fried board, those extra resistors are part of a voltage divider circuit to power my circuit for the stock eyes ( work in progress)

evan_ellerbe · 01-25-2013, 01:29 AM

R-M-I · 01-25-2013, 01:58 AM

So...a battery, a sear, a capacitor and a diode.

I was hoping someone finally tried going advanced here including several modes on a prototype-board and a microcontroller

Still, great to see people trying things

How does it work as it is? Any video up or something?

evan_ellerbe · 01-25-2013, 02:05 AM

Well it like a simple solution for a 555 timer , the basic circuit is when the switch is not depressed the n and c of the switch are connected so the capacitor charges , when the switch is depressed the n and o of the switch are connected discharging the capacitor a cross the solenoid the Diode stops the capacitor solenoid circuit from resonating , simply it solves the problem of connecting the battery directly to the switch and solenoid and having the solenoid stay active if the switch is held down which can cause problems for a sear pin gun

evan_ellerbe · 01-25-2013, 02:06 AM

I used the same circuit with a smaller capacitor to mod a angel led from rechargable to 9v disposable

evan_ellerbe · 01-25-2013, 02:17 AM

Video http://m.youtube.com/watch?v=4xdTOMg3ikc