[Pdubs]

Has there been an update from the V1.01 creed software?

and what exactly makes a V2 creed "V2" (from V1)

I have an LP poppet, but was there anything else? The rammer?

[cocker addict]

V1 creeds had the front grip screw inside the grip frame and the V2 had it between the grip frame and the HPR.
Chances are you have a V2 already because there is not alot of V1 out there still.
As for updated parts available: updated LPR, lightened rammer, white delrin bolt and I believe they strengthened the valve body? You can get pooty modded bolts also.

[Reaper (ACI)]

If you can take pics of your parts, I can tell you if your creed is up to date.

[Pdubs]

it's v2 I believe, I just wanted to know the differences

[Reaper (ACI)]

But not all V2 have the same parts.

[MstrKey]

Originally Posted by Reaper (ACI)

But not all V2 have the same parts.

Very true, I have one of the first V2's and originally it had the plastic poppet and older LPR body. Later V2's obviously have the LP poppet and a slightly updated LPR body which worked way better once I switched. It was a totally different gun after I got all the complete updates. Of course then I put the LW ram, double oring lpr piston and pooty bolt. Now it sings

[Pdubs]

I have an LP poppet and the new LPR I believe. I plan on putting a pooty bolt in it.

[MstrKey]

Originally Posted by Pdubs

I have an LP poppet and the new LPR I believe. I plan on putting a pooty bolt in it.

The pooty bolt is ok IF you have the proper orings for it. The right size and the right durometer. They need to be a bit soft to expand when you shoot, or you won't see the added benefit. They'll also need to fit your upper tube properly. Variances between the bolt and upper tube may mean you need to experiment a bit. It took me a while but I finally found the proper size and stiffness.

Without the proper orings and fit you won't see any difference over the stock bolt. So it's not the most amazing upgrade in reality. One thing I do like about the pooty bolt is the way it's milled down. You can oil up the orings.....slide the bolt into the gun and the oil will never transfer to the front of the bolt. This prevents it from getting in your breech, even if you use a bit too much oil. Kind of nice. Is it worth the extra money? Probably not.....but in the end I'm happy with it.

[JUGGERNAUT69]

I use a square Oring 70 duro buna that I got from reaper seals better than a regular Oring. Thats what pooty used in his bolt too. If any of you guy needs one just pm me, I have about a hundred of them, just cover the shipping.

[MstrKey]

When I got mine it just had standard 90 duros on it I think, and they were way too small for my upper tube. I just played around to get the proper fit. If I remember correctly I was able to get a 30-40fps increase instantly.