Back to cockers

Sinister1983 · 01-19-2013, 10:30 PM

I have been away from cockers for a good while but today I took possession of a LNIB 05 prostock with no leaks and is still timed. I will take it to the field tomorrow for "testing" lol. Care to take bets as to how many balls I chop from short stroking the trigger? Also any idea what these go for? Here is a pic. It came with the stock barrel, I already had the freak for my etek 3.

Jimmy Robo · 01-19-2013, 10:31 PM

150 ish.

Sinister1983 · 01-19-2013, 10:39 PM

Cool. I got it for 135.

Darkapollo · 01-19-2013, 11:18 PM

It is very hard to short stroke a hinge frame... so.. Im going to say none.

Sinister1983 · 01-19-2013, 11:23 PM

Thats good to hear but I bet I do it anyway lol! I went a head and took out the bolt to clean and oil the orings and I also put a drop or two of oil in the asa for good measuse.

Dk-79 · 01-19-2013, 11:57 PM

Looks like something might be up with your trigger pin. Someone probably lost the set screw.

Nice find for $135

Sinister1983 · 01-20-2013, 12:09 AM

Thanks. The previous owner mentioned the trigger pin was loose and I assumed they were the tap in kind. Any ideas where to get a replacement? Also is this the correct feed neck? http://www.ultimatepaintball.com/p-4342-3skull-autococker-clamping-feedneck-aluminum-feed-dust-black.aspx?CAWELAID=693504418&catargetid=139138259 0&cagpspn=pla&gclid=CLWgzOSi9rQCFayPPAodE3cA9Q

tacxplosion · 01-20-2013, 07:27 AM

There's a set screw that keeps it in place, if it's still there, all you have to do is take the frame off & tighten it through the top of the frame.
Yes, that is the correct threaded feedneck.

Sinister1983 · 01-20-2013, 10:20 AM

Took the frame off and the only screw that I was able to see was in the trigger so I tightened that to snug. It wasn't really that lose.

addicted2dunes · 01-20-2013, 10:41 AM

Quote:

Originally Posted by Sinister1983

Took the frame off and the only screw that I was able to see was in the trigger so I tightened that to snug. It wasn't really that lose.

That's the one that holds that pin in....

Sinister1983 · 01-20-2013, 10:55 AM

Cool. I thought it might have been a trigger travel stop. Off to go play and give the old girl a field test. I'll Post the results up when I get home.

Dk-79 · 01-20-2013, 11:05 AM

If you take off the grips, on the top of that cutout will be another little hole with a set screw in it. That's the trigger stop.

rsion4191 · 01-20-2013, 01:48 PM

Lmk if you wanna part with it. I'm interested.

Sinister1983 · 01-20-2013, 06:34 PM

**update** everything went well at the field. I had to drop the fps via the ivg as it was shooting 330+. A few turns later and i was under 300. My only complaint is that the marker isnt very consistant over the chrono. Its all good though. For a rec ball day i didnt even greak out my etek. Next up is sweet spotting the reg. If anyone has a good link for a how to please post it.

tacxplosion · 01-20-2013, 08:13 PM

oil through the ASA, sweetspot the HPR and underbore good paint, that should get you +/-7 on the chrono easily.

Sinister1983 · 01-20-2013, 08:43 PM

I already oiled the asa with sone Eclipse oil. I still need to sweet spot the reg and i usually straight bore with my freak kit

Rebel_816 · 01-21-2013, 06:16 PM

Quote:

Originally Posted by Jimmy Robo

150 ish.

whered you find one for $150? i always see them go for $200ish.