Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Thread Tools
Old 01-17-2013, 05:15 AM #1
Angry Norwegian
R-M-I's Avatar
Join Date: Jun 2008
Location: Norway
Annual Supporting Member
R-M-I posts videos on PbNation
DIY Eblade Eye (eye for autococker)

As getting parts for autocockers is getting increasingly difficult, I decided to make some of my own. This time it's eblade eye(s).
This post is simply a mirror of my original post on my personal blog.

For this project you'll need:
- Wire with molex connector: (Mini. Micro 1.5 4-Pin JST Connector w/Wire)
- Epoxy glue or nailpolish and superglue.
- Heatshrink tubing

First off, you'll need to solder the wires onto the "legs" of the photointerrupter.. I placed the interrupter with the flat side UP in my "helping hands".
Then measure up how "short" you can cut the leg of the photointerrupter and snip the excess off.
Slide some heatshrink tubing over the cable-"ribbon" and let it stay down by the connector.
Solder the white wire onto the upper right "leg", the yellow onto the lower right, the black onto the lower left and the red to the upper left.

Cover the legs and solderjoints in either epoxy or a generous layer of nailpolish.

Let dry COMPLETELY, then drag the heatshrink-tubing over the interrupterlegs and solderjoints. Then put a heatsource to it to shink it onto the joints to keep everything in place.
I tend to over"dimension" the securing of my projects. So grab your favorite brand of superglue and cover the top and bottom of the heatshrink-tubing.
TEST your completed eye!

I'm sorry that some of the pictures looks like they've been taken using a 3week old potato. I can always take new ones using my DSLR, when doing my next batch of eyes

MiniHalfblockMQ-cocker | Warped Sportz Dark Ego 6 |Freeflow MQ project cocker

Feedback: via google-translate) -> rl

I <3 MQ-valves!
R-M-I is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Old 01-19-2013, 07:32 AM #2
Shooter28's Avatar
Join Date: Jul 2007
Shooter28 plays in the PSP
 plays in the NXL
Shooter28 supports DLX Technology
Shooter28 supports Empire
Rebel.Renegade. Must stay paid.
sh(--)ker Owners v.LXII

Gun Sale Thread | SHOCKER PARTS!!! | My gun collection | D00M.
Shooter28 is offline   Reply With Quote
Old 01-21-2013, 08:24 AM #3
paintballer187's Avatar
Join Date: Dec 2001
Location: U.P. of MI
Annual Supporting Member
paintballer187 is a Moderator
paintballer187 is a Supporting Member
 has been a member for 10 years
paintballer187 works for a Paintball manufacturer
Awesome find.
paintballer187 is offline   Reply With Quote

Thread Tools

Posting Rules
Forum Jump