[spartan117d7]

Let's see what people come up with!

Other than sending it in to Billy Wing, who thinks they have the best tuning and mods to make the NT11 as low as kick possible!


BELOW ARE THE THINGS EVERYONE KNOW BUT DO YOU HAVE SOMETHING TO ADD OR CHANGE?

Four Recommended Settings.


1. Super smooth – lowest recoil, quiet, shoot the most fragile paint
a. Green bolt tip insert, no spacer insert
b. Operating pressure approximately 110psi
c. Efficiency: 1200-1300 shots off a 68/4500 tank

2. Stock settings from factory – balance of all performance features
a. Red bolt tip insert, no spacer insert
b. Operating pressure approximately 120psi
c. Efficiency: approximately 1400 shots off a 68/4500 tank

3. Efficiency one – better efficiency, still well balanced performance
a. Red bolt tip insert, green spacer insert
b. Operating pressure approximately 130psi
c. Efficiency: approximately 1500 shots off a 68/4500 tank

4. Efficiency two – ultimate spool valve efficiency
a. Red, or blue bolt tip insert, yellow spacer insert
b. Operating pressure approximately 140psi
c. Efficiency: 1600-1700 shots off a 68/4500 tank

[spartan117d7]

as well as which lube? I have been experimenting around

[psycho91]

And having your dwell properly set

[spartan117d7]

Originally Posted by psycho91

And having your dwell properly set

\and how would you suggest that?

[psycho91]

Leave it at its stock dwell setting, Put in the spacers you want, set your velocity, and then lower your dwell by 1 and check your velocity, keep lowering it by 1 each time remembering to check your velocity each time, when you finally notice a drop in your velocity go back and increase your dwell by 1 or 2, your dwell has now been properly set

[Paint_hore]

Originally Posted by spartan117d7

as well as using Strictly Paintball Magic Honey lube

Just stop already, DYE lube works just fine.

[wesr]

Originally Posted by Paint_hore

Just stop already, DYE lube works just fine.

X2

the nt is supposed to have some drag to the bolt....

[MaSsAcRe251]

Originally Posted by Paint_hore

Just stop already, DYE lube works just fine.

x3

Seriously, you don't need to post in every thread in this forum telling people that some special lube will somehow make your marker magical. Dye lube works completely fine.