[amossbur]

I just picked up a new traccer a week or so ago and I am having trouble reaching velocity. I am using compressed air. When I chrono, I am getting a max of 220 fps and its very sporadic. Like, +/- 30 sporadic.

I did a search and found that I could use cocker springs in place of the hammer spring to increase velocity. I used the reg spring from my kit as suggested, cut it to length and still had the same results.

Anyone have an idea as to what I could do to get this thing shooting?

[amossbur]

Anybody?

[suaze]

Here's a link that may help.

http://www.mcarterbrown.com/forums/p...-issues-2.html

[amossbur]

Ya, that's the first thing I worked on. My paint to bore match is great, but still getting the issues. Thanks for the link though

[agemma]

What was wrong?

[amossbur]

Haven't been able to fix the problem yet. Tried new spring, paint/bore match is perfect.

[The Inflicted]

Originally Posted by amossbur

Haven't been able to fix the problem yet. Tried new spring, paint/bore match is perfect.

The match shouldn't be perfect- the fit should be tight.

[amossbur]

Originally Posted by The Inflicted

The match shouldn't be perfect- the fit should be tight.

I what was meant

[EmpireTech]

Originally Posted by amossbur

Haven't been able to fix the problem yet. Tried new spring, paint/bore match is perfect.

It could be a bad power tube.. If nothing else we can have you send us the marker and then we can try to repair it for you under warranty. Please email us at tech@paintballsolutions.com with the following;

Name,
Phone Number,
Shipping Address,
Requesting Parts or RMA