Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Closed Thread
 
Thread Tools
Old 01-09-2013, 10:21 AM #1828
Rob @ Ninja PB
 
 
Rob @ Ninja PB's Avatar
 
Join Date: Sep 2010
Location: Chicago, IL
Rob @ Ninja PB works for a Paintball manufacturer
Rob @ Ninja PB owns a Planet Eclipse Ego
Rob @ Ninja PB supports Team VICIOUS
Rob @ Ninja PB supports our troops
Quote:
Originally Posted by onu2015 View Post
i seem to be having trouble with my tank when i screw it into the gun. It appears to be that the middle pin may be sticking out further than it should letting the air out to soon. This is the first time ive tried this tank on this marker and no longer have any others to try it on to see if it is the tank or the gun. but again the pin looks to be sticking out to far.
OK, im not understanding what the problem is.

So you screw the air system into your marker and what exactly is the issue? Does air leak out after you fully seat the regulator into the ASA?
__________________
http://www.ninjapaintball.com
http://www.facebook.com/ninjapaintball
NINJA IS PROUDLY MADE IN THE USA - NOT CHINA
Certfied Hydro Test Facility - DOT RIN# G777
NINJA USERS CLUB
Rob @ Ninja PB is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 01-09-2013, 10:23 AM #1829
Rob @ Ninja PB
 
 
Rob @ Ninja PB's Avatar
 
Join Date: Sep 2010
Location: Chicago, IL
Rob @ Ninja PB works for a Paintball manufacturer
Rob @ Ninja PB owns a Planet Eclipse Ego
Rob @ Ninja PB supports Team VICIOUS
Rob @ Ninja PB supports our troops
Quote:
Originally Posted by apstephens97 View Post
I got a ninja 68/45 last summer now the pin that lets the air out sticks and lets some air out till i push it in again its like when it gets unscrewed slow it sticks. Like in a screw in on/ off as opposed to a pops or raps. I already tried lubing the bonnet pin assembly but it did it again so I'm wondering if this is just an annoyance I'll have to deal with or if there's a fix.
You lubed the bonnet pin assembly?

Why told you to do that? You dont put lube there.

What you need to look at is the white teflon oring that sits on the inside of the top part of the bonnet. After you degas your bottle, remove bonnet, pull out piston, remove small white oring in the pocket on the inside of the top half of the bonnet, clean pocket with cotton swab, clean off the small white teflon oring, wipe off the brass pin valve (pin that sticks out the top of your reg), reassemble the regulator and try that. I have a feeling if you have never opened your regulator to clean it, its probably time.
__________________
http://www.ninjapaintball.com
http://www.facebook.com/ninjapaintball
NINJA IS PROUDLY MADE IN THE USA - NOT CHINA
Certfied Hydro Test Facility - DOT RIN# G777
NINJA USERS CLUB
Rob @ Ninja PB is offline  
Old 01-09-2013, 03:15 PM #1830
HeadHunter59
MidWest-Paintball
 
HeadHunter59's Avatar
 
Join Date: Jun 2004
Location: Land Of Cheese,WI
Annual Supporting Member
 has been a member for 10 years
HeadHunter59 supports Cereal Killerz 2
HeadHunter59 donated to help Peyton Trent
HeadHunter59 is playing at Living Legends VII
HeadHunter59 supports Bob Gurnsey
HeadHunter59 supports our troops
HeadHunter59 is Immortal
Rob can the 77s be had in colors? I need me an orange one with SLP reg pretty please!

I need to keep up with sonic and his 90 w/SLP
__________________
Russian Legion Fan Club Member #169
Russian Legion Love Club#19
ASMC
∅♦♦♦∅ OldSchool Trust! +23/0/0∅♦♦♦∅ IOG Feedback +4/0/0∅♦♦♦∅
∅♦♦♦∅
HeadHunter59 is offline  
Old 01-09-2013, 04:08 PM #1831
Rob @ Ninja PB
 
 
Rob @ Ninja PB's Avatar
 
Join Date: Sep 2010
Location: Chicago, IL
Rob @ Ninja PB works for a Paintball manufacturer
Rob @ Ninja PB owns a Planet Eclipse Ego
Rob @ Ninja PB supports Team VICIOUS
Rob @ Ninja PB supports our troops
Quote:
Originally Posted by HeadHunter59 View Post
Rob can the 77s be had in colors? I need me an orange one with SLP reg pretty please!

I need to keep up with sonic and his 90 w/SLP
Sorry bud. The 77 only comes in Dura Black for now. If all goes well with the colored 68's, then we may look at doing other sizes in different colors but we're still testing the market to see how popular the colors are.

sonic is beast lol. I dont know anyone that carries more paint on the field...and that includes UWL's Heavy Gunners haha
__________________
http://www.ninjapaintball.com
http://www.facebook.com/ninjapaintball
NINJA IS PROUDLY MADE IN THE USA - NOT CHINA
Certfied Hydro Test Facility - DOT RIN# G777
NINJA USERS CLUB
Rob @ Ninja PB is offline  
Old 01-09-2013, 04:39 PM #1832
HeadHunter59
MidWest-Paintball
 
HeadHunter59's Avatar
 
Join Date: Jun 2004
Location: Land Of Cheese,WI
Annual Supporting Member
 has been a member for 10 years
HeadHunter59 supports Cereal Killerz 2
HeadHunter59 donated to help Peyton Trent
HeadHunter59 is playing at Living Legends VII
HeadHunter59 supports Bob Gurnsey
HeadHunter59 supports our troops
HeadHunter59 is Immortal
Rats. Really wanted color one.. Maybe hold off for now then.

Yea he crazy sob lol.
__________________
Russian Legion Fan Club Member #169
Russian Legion Love Club#19
ASMC
∅♦♦♦∅ OldSchool Trust! +23/0/0∅♦♦♦∅ IOG Feedback +4/0/0∅♦♦♦∅
∅♦♦♦∅
HeadHunter59 is offline  
Old 01-10-2013, 01:07 PM #1833
onu2015
Da Bears
 
onu2015's Avatar
 
Join Date: Jun 2012
Location: Trenton OH
onu2015 owns a Planet Eclipse Ego
onu2015 owns a Planet Eclipse Lv1
onu2015 supports Team VICIOUS
onu2015 supports Team VICIOUS
onu2015 supports DLX Technology
Quote:
Originally Posted by Rob @ Ninja PB View Post
OK, im not understanding what the problem is.

So you screw the air system into your marker and what exactly is the issue? Does air leak out after you fully seat the regulator into the ASA?
Air begins to leak before the reg is fully seated in the asa.
__________________
JT Impulse F/S/T
onu2015 is offline  
Old 01-10-2013, 03:59 PM #1834
Rob @ Ninja PB
 
 
Rob @ Ninja PB's Avatar
 
Join Date: Sep 2010
Location: Chicago, IL
Rob @ Ninja PB works for a Paintball manufacturer
Rob @ Ninja PB owns a Planet Eclipse Ego
Rob @ Ninja PB supports Team VICIOUS
Rob @ Ninja PB supports our troops
Quote:
Originally Posted by onu2015 View Post
Air begins to leak before the reg is fully seated in the asa.
What happens when you fully seat the reg? Does the leak stop?

So it sounds like you may hear a quick leak as you install the air system? If the leak stops after fully installing the air system, as long as your marker is not leaking, I dont see a problem because any air escaping out should go directly into your marker.
__________________
http://www.ninjapaintball.com
http://www.facebook.com/ninjapaintball
NINJA IS PROUDLY MADE IN THE USA - NOT CHINA
Certfied Hydro Test Facility - DOT RIN# G777
NINJA USERS CLUB
Rob @ Ninja PB is offline  
Old 01-12-2013, 10:49 PM #1835
LRGOOSE
 
 
LRGOOSE's Avatar
 
Join Date: Feb 2012
Location: Oklahoma
LRGOOSE owns a Planet Eclipse Ego
Does anyone know if Your dura 77 will fit the exalt Medium tank cover? The one that wraps around most of the tank.
__________________
GEARBAG SALE!!!!!
http://www.pbnation.com/showthread.php?t=3870965
LRGOOSE is offline  
Old 01-13-2013, 01:31 AM #1836
ventturei26
100 mph U-Turn
 
ventturei26's Avatar
 
Join Date: Jul 2003
Location: Auburn, CA
 has been a member for 10 years
ventturei26 supports Pev's Paintball
ventturei26 has achieved Level 3 in PbNation Pursuit
whenever i disconnect the tank from my asa. it continues to leak till its empty or i move the needle up. brand new tank.
__________________
"can I borrow some paint...I'll give it right back!!"

OLD Feedback

Massive Gearbag Sale

ventturei26 is offline  
Old 01-14-2013, 12:18 PM #1837
Rob @ Ninja PB
 
 
Rob @ Ninja PB's Avatar
 
Join Date: Sep 2010
Location: Chicago, IL
Rob @ Ninja PB works for a Paintball manufacturer
Rob @ Ninja PB owns a Planet Eclipse Ego
Rob @ Ninja PB supports Team VICIOUS
Rob @ Ninja PB supports our troops
Quote:
Originally Posted by LRGOOSE View Post
Does anyone know if Your dura 77 will fit the exalt Medium tank cover? The one that wraps around most of the tank.
LRGOOSE, i'm not 100% sure as we only sell tank grips that cover just the butt of the bottle. We dont sell the 3/4 cover Exalt makes. You may want to contact Exalt to see what they say. sorry I cant help you out more with this.
__________________
http://www.ninjapaintball.com
http://www.facebook.com/ninjapaintball
NINJA IS PROUDLY MADE IN THE USA - NOT CHINA
Certfied Hydro Test Facility - DOT RIN# G777
NINJA USERS CLUB
Rob @ Ninja PB is offline  
Old 01-14-2013, 12:19 PM #1838
Rob @ Ninja PB
 
 
Rob @ Ninja PB's Avatar
 
Join Date: Sep 2010
Location: Chicago, IL
Rob @ Ninja PB works for a Paintball manufacturer
Rob @ Ninja PB owns a Planet Eclipse Ego
Rob @ Ninja PB supports Team VICIOUS
Rob @ Ninja PB supports our troops
Quote:
Originally Posted by ventturei26 View Post
whenever i disconnect the tank from my asa. it continues to leak till its empty or i move the needle up. brand new tank.
It sounds like the pin might not be sitting on the pin spring correctly. If you give us a call at 877-646-5287 (toll Free#), tell us exactly what you type above and we can see if we can walk you through the steps over the phone to fix it. Make sure to have a 3/32 allen key and your air system when you call.
__________________
http://www.ninjapaintball.com
http://www.facebook.com/ninjapaintball
NINJA IS PROUDLY MADE IN THE USA - NOT CHINA
Certfied Hydro Test Facility - DOT RIN# G777
NINJA USERS CLUB
Rob @ Ninja PB is offline  
Old 01-14-2013, 02:45 PM #1839
Justthatlucky6
NY Smashmouth Paintball
 
Justthatlucky6's Avatar
 
Join Date: Feb 2011
Location: Long Island
Justthatlucky6 plays in the PSP
Justthatlucky6 is an NCPA player
Justthatlucky6 supports Empire
will a dm13 work on slp reg? if not what would be wrong with it
__________________
Shane Fitzmaurice
Gearbag Sale

T2 Topgun #11 -2012 - Pres
Utica Coalition #11 - 2012- Pres
Wolfpack 4 #1 - 2011-2012
Long Island Nightmare #6 - 2010-2011

SUNY Oswego Rush #6/1 - 2010 - 2012
Justthatlucky6 is online now  
Old 01-14-2013, 02:55 PM #1840
saintk
 
 
saintk's Avatar
 
Join Date: Mar 2009
Location: 315 NY
saintk owns a Planet Eclipse Geo
saintk posts videos on PbNation
saintk is an NCPA player
saintk plays in the APPA D4 division
saintk has achieved Level 3 in PbNation Pursuit
Best output for an axe?
__________________
2012 vanguard demon f/s/t
misc gear f/s

Shenanigans '09-'10 #16 NYPL, WIPS
Utica Coalition '09-13 #16 NAPL
SUNY Oswego '10-? #16 NCPA

Sponsored by: G.I. Sportz, Understood
saintk is offline  
Old 01-14-2013, 03:36 PM #1841
Rob @ Ninja PB
 
 
Rob @ Ninja PB's Avatar
 
Join Date: Sep 2010
Location: Chicago, IL
Rob @ Ninja PB works for a Paintball manufacturer
Rob @ Ninja PB owns a Planet Eclipse Ego
Rob @ Ninja PB supports Team VICIOUS
Rob @ Ninja PB supports our troops
Quote:
Originally Posted by Justthatlucky6 View Post
will a dm13 work on slp reg? if not what would be wrong with it
No, the SLP is built specifically for the Bob Long G6R and Victory.

We recommend using a Ninja regulator with an output around 450psi-550psi for a DM13.
__________________
http://www.ninjapaintball.com
http://www.facebook.com/ninjapaintball
NINJA IS PROUDLY MADE IN THE USA - NOT CHINA
Certfied Hydro Test Facility - DOT RIN# G777
NINJA USERS CLUB
Rob @ Ninja PB is offline  
Old 01-14-2013, 03:37 PM #1842
Rob @ Ninja PB
 
 
Rob @ Ninja PB's Avatar
 
Join Date: Sep 2010
Location: Chicago, IL
Rob @ Ninja PB works for a Paintball manufacturer
Rob @ Ninja PB owns a Planet Eclipse Ego
Rob @ Ninja PB supports Team VICIOUS
Rob @ Ninja PB supports our troops
Quote:
Originally Posted by saintk View Post
Best output for an axe?
550psi will cover any board settings or upgrades you decide to use on an Axe
__________________
http://www.ninjapaintball.com
http://www.facebook.com/ninjapaintball
NINJA IS PROUDLY MADE IN THE USA - NOT CHINA
Certfied Hydro Test Facility - DOT RIN# G777
NINJA USERS CLUB
Rob @ Ninja PB is offline  
Old 01-14-2013, 03:56 PM #1843
saintk
 
 
saintk's Avatar
 
Join Date: Mar 2009
Location: 315 NY
saintk owns a Planet Eclipse Geo
saintk posts videos on PbNation
saintk is an NCPA player
saintk plays in the APPA D4 division
saintk has achieved Level 3 in PbNation Pursuit
thanks rob!
__________________
2012 vanguard demon f/s/t
misc gear f/s

Shenanigans '09-'10 #16 NYPL, WIPS
Utica Coalition '09-13 #16 NAPL
SUNY Oswego '10-? #16 NCPA

Sponsored by: G.I. Sportz, Understood
saintk is offline  
Old 01-14-2013, 11:39 PM #1844
meatloaf
COCKERMAN
 
meatloaf's Avatar
 
Join Date: Sep 2001
Location: *626*
meatloaf is a Supporting Member
meatloaf is a founding member
 has been a member for 10 years
Hey Rob, You replaced a cracked resin bottle for me last year. The resin did the same thing last weekend when i filled it up for the first time in months. Your thoughts? Has this issue been hashed out? Thanks.
__________________
-AKA/Splatt Attack Revenge V2
-04 CCM J2
-04 superman featherlite Viking
-02 Freeflow Lotus
-GX-3 sniper
-99 RF 'Cocker
meatloaf is offline  
Old 01-15-2013, 09:25 AM #1845
nochance
 
 
Join Date: Jul 2010
Location: TN
nochance plays in the PSP
nochance plays in the MiLP
nochance owns a Planet Eclipse Geo
nochance plays in the APPA D3 division
I'm sure it's been addressed in here,but there's just too many pages to dig through... Best output for a clone gt? In have an slp that I've been using on my geo 2.1. Works fine with it. Will it work for the clone?
nochance is offline  
Old 01-15-2013, 11:17 AM #1846
dynastyrebal
Skippy
 
dynastyrebal's Avatar
 
Join Date: Jul 2011
Location: D Side
dynastyrebal owns a Planet Eclipse Geo
dynastyrebal is for the Gunfight
dynastyrebal supports Pev's Paintball
dynastyrebal is attending Decay of Nations VI
What's up,
My 68 reg keeps blowing the 18 burst disk even after replacing it, should I buy a new reg or is there something wrong in the inside of it?
__________________
"The name's Skippay..."

LA Paintball Gateway-Pro 7 Man

Paintball Gateway-Open WCPPL
dynastyrebal is offline  
Old 01-15-2013, 01:08 PM #1847
Rob @ Ninja PB
 
 
Rob @ Ninja PB's Avatar
 
Join Date: Sep 2010
Location: Chicago, IL
Rob @ Ninja PB works for a Paintball manufacturer
Rob @ Ninja PB owns a Planet Eclipse Ego
Rob @ Ninja PB supports Team VICIOUS
Rob @ Ninja PB supports our troops
Quote:
Originally Posted by meatloaf View Post
Hey Rob, You replaced a cracked resin bottle for me last year. The resin did the same thing last weekend when i filled it up for the first time in months. Your thoughts? Has this issue been hashed out? Thanks.
It sure has. As of 8/15/12, any new bottle coming from our manufacturer or any bottle that has been sent in as of that date, will have a new formula. So far, all new bottles and any that were sent in for a new gel coat replacement from that date forward has had zero issues with cracking.

Click this link, follow instructions, and the manufacturer will remove the gel coat and reapply a new formula and pay for shipping both ways now
http://97.74.153.121/NinjaWarrantyTa...s/warranty.php
__________________
http://www.ninjapaintball.com
http://www.facebook.com/ninjapaintball
NINJA IS PROUDLY MADE IN THE USA - NOT CHINA
Certfied Hydro Test Facility - DOT RIN# G777
NINJA USERS CLUB
Rob @ Ninja PB is offline  
Old 01-15-2013, 01:10 PM #1848
Rob @ Ninja PB
 
 
Rob @ Ninja PB's Avatar
 
Join Date: Sep 2010
Location: Chicago, IL
Rob @ Ninja PB works for a Paintball manufacturer
Rob @ Ninja PB owns a Planet Eclipse Ego
Rob @ Ninja PB supports Team VICIOUS
Rob @ Ninja PB supports our troops
Quote:
Originally Posted by nochance View Post
I'm sure it's been addressed in here,but there's just too many pages to dig through... Best output for a clone gt? In have an slp that I've been using on my geo 2.1. Works fine with it. Will it work for the clone?
I'm gonna refer you to Shootinpoo here on PBNation. Eric is the US Rep for MacDev and a wealth of knowledge regarding and marker from that company. I know he is successfully running GT's (sick gun btw!) off of our SLP regulator on his factory team and its what he's been recommending to players. We have not personally tested the SLP on this marker but you can send him a pm to get his thoughts.
__________________
http://www.ninjapaintball.com
http://www.facebook.com/ninjapaintball
NINJA IS PROUDLY MADE IN THE USA - NOT CHINA
Certfied Hydro Test Facility - DOT RIN# G777
NINJA USERS CLUB
Rob @ Ninja PB is offline  
Closed Thread


Thread Tools

Posting Rules
Forum Jump