Originally Posted by MstrKey
Hmmm the board works with the charging cord in. I would try a reset on the board with the power on to see if that helps. It's a tiny grey button on the board itself.
Even though the battery says full power.......the board may not recognize it for some weird reason. Unplug the battery, turn on the board using the charger cord, then when the gun is on plug the battery in. Then power down and try again.
So I tried the reset and getting the board to recognize the battery following the steps you outlined.
Here is what I saw and noted.
-If i plug in the power cord to the board with no battery attached, the charge battery screen flickers. but if i then turn on the board the screen displays normally.
-Following the steps to get the board to recognize the battery, after attaching the battery and powering down the board: I unattached the power cord so the remaining power source is the battery. I am able to then turn on the board, however if I turn off the board and attempt to turn it back on I am unable to do so. Once I plug the power cord back in I am immediately able to turn the board back on..
-As I am typing this I am starting to think its the battery...