[soccerstud_2009]

Originally Posted by Revolution55

Just got mine in the other day, threw my POPs on it, this thing is sweet. I like the length of the stock barrel on it.

Haha sterling you got an enmey to?

[Rhino1XL]

Got one yesterday from ANS. it's for my sons 10th birthday. Had to shoot about 100 rounds out of it before I put it back in the box. Very impressed. I'm sure if he dosent like it, I'll have a blast with it.

[soccerstud_2009]

Got my enmey today, these guns shoot great

[soccerstud_2009]

The steel braided hose is a pain in the *** to get off lol, any tips besides putting some crank into it?

[bigbadbubba1337]

I cut the hose close to the fitting on each end, then use a deep 11mm socket and ratchet to get it off.

[soccerstud_2009]

Originally Posted by bigbadbubba1337

I cut the hose close to the fitting on each end, then use a deep 11mm socket and ratchet to get it off.

Ill give that a try

[soccerstud_2009]

Ended up stripping the fitting, has anyone applied heat (propane torch) to the fitting? This is the only other idea I can think of.

[Pvt. Jackson]

Originally Posted by soccerstud_2009

Ended up stripping the fitting, has anyone applied heat (propane torch) to the fitting? This is the only other idea I can think of.

You should be able to. Just remove the swivel from the regulator and remove the two o-rings first so you don't damage any seals. It shouldn't take too much heat to break the loctite.

[soccerstud_2009]

Originally Posted by Pvt. Jackson

You should be able to. Just remove the swivel from the regulator and remove the two o-rings first so you don't damage any seals. It shouldn't take too much heat to break the loctite.

Awesome ill give that a shot

[soccerstud_2009]

Ended up buying a new reg swivel instead.

I was thinking about it and if gog would release a pump enmey that would be sick