[minimag03]

I've managed to do that on a trauma matrix too, but I think it was because I had the trigger adjusted incorrectly. It was totally depressing the switch every time and I've heard it should have been adjusted so the leaf still had a tiny bit of room to move back. But the activation point itself couldn't be adjusted on them, one of the main reasons I moved away was trixs.

[The_Tiger19]

i have always had the same issue with my mini's consistency since it came brand new out of the box this past season. have switched all o rings, have a shockwave board in it. stock bolt and barrel and its always had a range of +-20 fps. was told by some it just needs to break in so i played with it for the whole season. by november it had not improved. so i hooked up my tank and just dry fired and cycled the bolt to try and break in the spring........still nothing, if im doing something wrong please let me know or any advice? and i have used a barrel kit on it and the consistency range went down but nothing major still in +-18 range

[minimag03]

What type of paint were you using? What type of barrel kit do you own? Ever lubed the reg?

[The_Tiger19]

evil tournament paint, and a deadly winds, never lubed my reg, do I just put oil in there?

[TeamBigShot]

easy, you gotta do the dump mod man, DUMP IT IN THE TRASH!

[skitsofraniak]

New barrel. Better paint.

[trucockerfan19]

Chances are all you need to do is lube the reg, but for if some reason that doesn't work send it back to kee