Chopper Duke's Custom Bullseye Envy
Category: Old School
- Bullseye Paintball Envy body
- Benchmark '98 Slider Frame
- WGP Reg
- Clippard Ram
- PPS Rock LPR
- Early STO 3-Way
- Shocktech RAT II Valve
- Evo Length Slik Bolt (pictured)
- Venturi Bolt (Not Pictured)
- KAPP Detent
Additional Info: Bullseye was a small company back in the late '90s, early 2000s. They offered a few different packages ranging from the Colossal ($650) to the Titan ($1200). They were most well known for their “Mammoth” trigger job which could be had separately for ($139). They offered 4 ano patterns; Lust, Rage, Vanity and Envy. Ravi did a review in 2000 that can still be read here. From everything I can gather, this was a gun that was sent to Bullseye to have a lot of work done.
I picked it up on eBay as a mislabeled gun. I then went through the entire thing, replacing what needed replacing and cleaning it up. 3-Way was the only part that was REALLY giving me fits, so I was able to get it open and replace a severely dry-rotted front o-ring. I put it back together and timed it up. I've got a '98 Benchmark frame coming to replace the Bob Long frame. That will help keep with the era of the gun and once that gets here, I'll get new pics and update the specs.
Dover's Bob Long Signature Series Team Ironmen
Category: Old School
Upgrades: Pretty much stock with OTP Tru Flite Bolt, Bob Long Power Reg, AKALMP SS LPC, Benchmark Goodies
Additional Info: Rear of Grip Frame Laser Engraved, Custom Annodize to match RASE Foxwood Camo
Cougar's 98 RF
Category: Old School
Trigger frame/frontblock = Boston Paintball Reflex Kit, This was installed on the gun by Boston paintball when the gun was new. 1 of 8 from what Ive read.
Valve = Shocktech rat
Bolt = AKA Lightning Bolt.....Although I may go back to the reflex bolt.
LPR = ANS JackHammer......This was one of the few aftermarket parts that was on the gun when i got it.
3 Way = Palmer Quickswitch
HPR = Palmer Fatty
LPC = AKA
Barrel = Old glued boomstick
This is my latest project that Ive for the most part finished up. Ive got a couple more small parts I want to gather. When I got it earlier this year is had been sitting in the previous owners closet for at least 5 years when he last had Boston Paintball go thru it. It was pretty much a stock RF with a full reflex kit & reflex bolt added. I have since swapped most of the parts.
The idea behind the build was to build the gun up as a sleeper. Well as much of one as it can be. Most people just see a old RF cocker when they look at it. Because of wanting it to be as much of a sleeper as possible many of the parts I swapped were chosen for performance & how closely they look to the stock parts.
CWW's Right Feed:
Marker: 1994 WGP Right-feed Autococker
- SP rosewood grips
- Stock '03 WGP cannon, er, barrel
- Late '90s or so shroud
- Some sort of venturi bolt
Trying to get it as close to stock as possible, or at least with tasteful upgrades. I need to find a different main spring, too, since I can't get below 320 with the IVG backed all the way out. Going to re-drill and tap that rear frame screw at some point, too.
Bob The Baller's Black Magic
- E2 Eblade Frame with 1.10
- Eclipse fully enclosed solenoid cover
- Palmers Quick Ram with QEV's
- Palmers Micro Rock LPR
- Pro Edition Karnivor Reg
- 14" Pro edition Kaner Barrel
- Karnivor Snatch grip
- CP cocker detent
- Yellow WGP on off
Upgrades: mq valve, eclipse ram with qev, palmer lpr, timmy trigger, side winder hpr
Jun's Dye Relfex
Marker: 2003 Dye Reflex
- Matching blue to black fade Worr frame
- Dcl-Inc Delrin Wave Trigger
- Planet Eclipse ZeroB Board
- Planet Eclipse Nexus Ram with QEVs
- Planet Eclipse Ego 5/6 Grips
- Karnivor Tickler LPR
- NDZ Dust Black Noid housing with PE cover plate
- Dye Airport ASA
- CP Shorty Reg with Dye NT Hyper 3 Grip
- Sanchez Machine Delrin Reflex Bolt
- CCM Pump Arm
- Check-it Detent
This started as a drilled Reflex body I found on eBay for $150 over a year ago. Not my first build but definitely one of my favorites. I have an incoming blue Karni snatch grip that I want to see how it looks on it. Going to send out the barrel front for blue anno in the future.
AKA Merlin round body with siterail
Eblade with sameri trigger
AKA LPR with .75cal bullet style adjustor
Palmer Ram with 2 qev's
Karnivor Solinoid cover
AKA Valve & internals
BP Feedneck, Also still have the matching ano feedneck
KillerGrips Skull eye cover
AKA 10" Javelin (not shown)
CP drop & some old Asa
The gun was originally setup by Dan Voils. Then sold to local player who I got it from. The ano is amazing. It was done by someone the seller refered to as Uncle Dave?? I really dont know much more other than I was told it was one of the last guns he did ano on.
- E1 w/ Zero-B
- Dcl-inc wave trigger
- Belsales ram w/ Eclipse QEVs
- hmcl sled
- CP detent
- Turtle snatch grip (or so I'm told)
- CP direct-mount
- Powerlyte Scepter
- CCM No-Pro
Did all the design/mill work myself, made the bolt/pin as well. Finally made a bolt pin that doesn't shear off because of a poorly-placed pin detent groove, angled inlet in the bolt, and no bolt o-rings (when you can fit the bolt to the body, who needs 'em?).
Upgrades:2 liter, eclipse lpr,eclipse ram+qevs, 06 star frame, feedneck mod, e2 board, mq2
Rebel's Tactical Trilogy:
Bauer The Baller's Freeflow:
CWW's WGP Mini-Orracle
- CP rail-mount
- Older WGP grips
Swapped the grips out because the giant jewels were trying to fall out of the stock ones. Still got 'em somewhere in my closet...
Triemferent's Spine I Cocker:
upgrades: 50/50 frame, sto ram, ccm lpr, hollow point 3way, glad hpr, eclipse asa