[UNDRPRVLGD_V2]

Where can I get the 9V adapter for my Z2, my buddy has one and it last longer (battery life) than the 4 AA I use.

[810-Donkey]

Originally Posted by Simon

Dead batteries.

What if i put new batteries and it shows yellow an wont spin?

[Lt. Tank]

Just got an RF transmitter kit to install on my ego 09. There is no 3 pin harness that can fit the Ego 09 board connector so i have to use the jump harness. When i connect the harnes and the board and when everything is in place, I power on the marker , turn off the eyes to test and IT SHUTS DOWN THE BOARD...no matter how many times I try it , it seams there is an overpower to the board it self that drives the shut down

What to do ? any chance to make it work ? or I just lost 20$ ?

Thanks

[StuSidekick]

What is the difference between your installation and the one in the youtube video?

http://www.youtube.com/watch?v=jkd_T...ture=endscreen

Please provide the differences.

[StuSidekick]

Can someone verify the following steps whether they are correct?

1. turn on marker
2. while holding down the reverse button, turn on z2
3. wait for orange light to blink
4. fire marker
5. light on z2 will turn blue
6. turn off z2

[pykim01]

anyone know whats going on with my z2? put in brand new duracell pro cells my company orders straight from duracell in this sunday. it was off and in my gearbag and tonight i turned it on and it's blinking red ... -.- do i have to take the battery harness off when im not using it??

[ethan levy]

I don't know if this has been asked yet, but is the Z2 shell compatible with the normal prophecy internals?

[lucidvtec]

I wanna know if my LTD kit will work in the new z2 loader??


I currently have the LTD kit installed in my original Prophecy....it seems like it should work...minus the MIC on the LTD board is on the bottom and it seems like a clearance issue

HELP??

[ego-man]

Put brand new duracell batteries in my prophecy and it still blinks red. What to do?

[Statiistic]

I need help setting up my Empire Prophecy, can somebody PM me? I can really use the help.

[AndoyPinoy]

Paint keeps breaking in my z2 any help?

[TheBoss33]

Originally Posted by AndoyPinoy

Paint keeps breaking in my z2 any help?

What gun do you have? Is the paint broken down in the feedneck area of the hopper?

[AndoyPinoy]

I have an axe. Yes but it's happened when I owned my ego as well sometimes paint gets on the wheel as well

[AndoyPinoy]

When I switch back to my rotor there is no problem

[TheBoss33]

Originally Posted by AndoyPinoy

I have an axe. Yes but it's happened when I owned my ego as well sometimes paint gets on the wheel as well

Check for blow back on the marker. The Z2 is not very forgiving for blow back.

[Bosco56]

Do the z2 shells work on the prophecy?

[pat4844]

Hey I have an empire prophecy that I just picked up. The wires on the battery harness were pretty stripped and ended up getting detached and is not functioning. If anyone can let me know where I can buy this piece/anyone on here that has one would be appreciated.

[TheBoss33]

Originally Posted by pat4844

Hey I have an empire prophecy that I just picked up. The wires on the battery harness were pretty stripped and ended up getting detached and is not functioning. If anyone can let me know where I can buy this piece/anyone on here that has one would be appreciated.

PM'd

[pat4844]

Thanks I appreciate it