[FCMEDIC]

I picked up a razorback pump from the local pawn shop. The gun is great shape other then where you seat the 12gram,the seal looks pretty wore out. Can u buy that part any where and what is it actualy called.

[Castro #66]

There is some variation within the industry, but if it looks removable, you should be able to use a pierce cup from a Phantom, which should be available from CCI.

Of course, the seals are just urethane disks glued into place. I've made a few of those in my time.

[FCMEDIC]

Yeah it looks removable, has the slots in the sides. Now I jus find a wide enough screwdriver to take it out.

[Pyrate Jim]

Originally Posted by FCMEDIC

Yeah it looks removable, has the slots in the sides. Now I jus find a wide enough screwdriver to take it out.

The screwdriver slots are to remove the piercing pin. If you have to pull that be sure to cut a slot up the middle of the screwdriver blade so it wont hit the piercer itself.

But you don't have to pull that out just to replace the face seal (the name of that urethane disc).
Usually just glued in, the old one can be scraped out using a metal dental pick and a replacement stuck in with a drop of superglue.

One thing I've found, face seals from CCI are thicker than the ones on older markers and sometimes are too thick to allow the 12g to pierce.
The face seals sold by Palmers are thinner, allowing more of the piercer to poke through.