Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Thread Tools
Old 01-06-2013, 10:07 PM #1
Join Date: Jan 2013
04 prostock autococker pump problem

ok so i get my autotrigger and pump kit put on my 04 prostock autococker i initially got the pumnp kit on no problem and i had a pump autococker it worked right then i put the autotrigger kit on after i figured out why i couldnt get it on before and the gun holds air but when i got to pump and shoot i dont get anything?
codywynn26 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Old 01-06-2013, 10:19 PM #2
HeatedNubbycake's Avatar
Join Date: Jul 2010
Location: Mechanicsburg, PA
HeatedNubbycake plays in the PSP
HeatedNubbycake supports Team VICIOUS
HeatedNubbycake supports Pev's Paintball
HeatedNubbycake has achieved Level 3 in PbNation Pursuit
uh. adjust the A/T cam. the point of the autotrigger is to not let the gun shoot if the pump handle isnt the whole way forward. that only works if the A/T cam is adjusted right. when you put it in hold the trigger in with the trigger against the flat part of the cam, loosen the A/T arm and move it to the hole drilled on the pump arm, tighten everything up and you should be pretty close to where it will be most efficient.
SubZero Pump

The only urine sample your getting from me is a taste test.
HeatedNubbycake is offline   Reply With Quote
Old 01-06-2013, 11:38 PM #3
Join Date: Jan 2013
i mean like the bolt pin thingy under the bolt the thing you cock back it doesnt stay back unless i pump the gun really slow like just pulling it back and letting it go it will slip forward
codywynn26 is offline   Reply With Quote
Old 01-07-2013, 07:51 AM #4
Castro #66
Not a Moderator*
Castro #66's Avatar
Join Date: May 2005
Annual Supporting Member
Castro #66 is a Moderator
Castro #66 is a Supporting Member
 has been a member for 10 years
Castro #66 is playing at Living Legends VIII
Castro #66 is one of the top 500 posters on PbNation
Castro #66 is Legendary
You need to adjust your hammer lug, accessible through the hole in the top of the body. If you check the Ultimate Sticky at the top of this forum, there are links to installing and adjusting your auto-trigger.
Certified Master Airsmith
Airsmithing & 3rd Party Shipping - PM for details
Can't we all just play Paintball?

Castro #66 is offline   Reply With Quote

Thread Tools

Posting Rules
Forum Jump