[Mppittman]

I have a view loader prodigy e grip that I don't know much about, does anybody know about these? I did completely strip it down today and checked all the rings which are good. Also when I pull back the bolt action it dosent go forward if i pull the trigger, what could be the cause of that or is that right?

[pbkidminion]

Make sure you have the gun on when you want the bolt to go back forward. Otherwise the electronic solenoid won't release the hammer. I'm assuming the gun is a spyder clone, therefore that's what I'm going off of. It might be a bad capacitator, due to using 9 volts instead of 9.6 volts (if its a spyder clone).

[Mppittman]

Well if I have the trigger on the first setting,"red light"it won't fire but that's with no tank hooked up. If i have it on the second setting which is the "green" light it will fore and move forward. I'm assuming the green light is semi setting but I do t understand why it fires on that setting but not the other. Also it did have a 9v in there and I put another one in, I have no clue if it's a 9.6 system.

[pbkidminion]

Red setting is probably safety, green is safety-off/ready to fire.

[Mppittman]

Ya, figured that out, lol.