[DOMINASIAN]

I have the eyes turned off and I'm not hearing the little tik that I should hear when I pull the trigger. Should I reset the board to factory reset? I still shoots paint with no leaks but I like to use the the little tik for practicing walking the trigger but it is hard to practice with semi if you don't hear the tik. The tik isn't there in psp or any other modes either all I can hear is the trigger when it hits the frame.

[hawkins312]

I think that the solenoid design in the Etha is air assisted, so it doesn't make the tick without air but will work once aired up.

[Egos4flifeguy]

Originally Posted by hawkins312

I think that the solenoid design in the Etha is air assisted, so it doesn't make the tick without air but will work once aired up.

Correct, not hearing it is normal, as the noid is super efficient in using the smallest amount of air needed. Sometimes not clicking.

[hayden561]

My etha made the ticking noise for the first month i had it but has not since then.

[Apewar]

if the battery is used at all the click noise goes away but doesnt affect the marker at all. only a fresh battery has the juice to click but that wont last a long time

[DOMINASIAN]

It was the battery. The board said the battery was at full but the solenoid didn't have the tik and I replaced the battery and I got the tik again

[lucidvtec]

NEVER ever heard a click.......even with brand new batteries