Need Help with Orracle Wont fire

03Ramon24S · 01-05-2013, 07:45 PM

Ok so I can't figure out whats going on with this gun and need some help. I cleaned it all up so the noid and sear noid now click and work. But when I gas it up nothing leaks but it wont fire / cycle. Any body have any suggestions??? I tried airing it up with hoses detached on the 3 way and didnt leak air at all out of any of them does that sound right? I did get it to shoot once magicly. Also when I push the orange button on the bottom of the noid it still doesn't cycle.

Tried two different regs as well. And pressure on the gauge is at 400 tried it as low as 200 and up to 600 nothing changed.

Even did a factory reset on the board at least it think i did.

Here is a pic if it helps
http://i1257.photobucket.com/albums/...105_202730.jpg

Darkapollo · 01-05-2013, 08:28 PM

Your LPR is turned down to 0. If you have no air at the 3way theres your sign. I see its a tickler. Screw the cap in.
The orange button only forces the spool to move, not 'cycle'.

03Ramon24S · 01-05-2013, 08:47 PM

I screwed the lpr all the way in and it doesnt change anything. It is like something is missing in there. I just put a screw in there to move the brass thingy when i turn it in, and it blew the hose off the ram but it did kinda cycle. Should i just buy a new lpr?

03Ramon24S · 01-05-2013, 08:50 PM

Here is a pic of it apart if it helps.
http://i1257.photobucket.com/albums/...105_214836.jpg

Darkapollo · 01-05-2013, 09:16 PM

Heh you are missing one very key part.. The spring.
Pick up a new LPR.

03Ramon24S · 01-05-2013, 09:59 PM

Lol thanks for the help I will check out ebay now

Darkapollo · 01-05-2013, 10:02 PM

Check customcockers.com
A member on there has a huge lot of parts for sale, also hmcl alwas has a bunch of parts hes selling as well.

03Ramon24S · 01-05-2013, 10:59 PM

I will check them out I wonder if a spring from one of the shocks on my 1/16 scale r/c cars might work in there. I'll figure it out thank you for the help I was racking my brain and thought I checked everything but apparently not.

Darkapollo · 01-05-2013, 11:11 PM

Not likely on the spring.. Its a very stiff spring as that is what keeps the piston and pressure regulated. I will take a picture of it for you in the morning.